Drain binder - Binder for drainage mortar - Knauf

Drain binder - Binder for draining mortar - Knauf

The Knauf drain binder is a dry , mineral binder made in the factory.
It is hydraulically hardened and contains synthetic resin .

• Materials based on cement , filler and selected additives as well as additives for the improvement of the properties of implementation and mechanical resistance.

Application domain :

Knauf Drain binder is a binder used for the manufacture of draining and very resistant mineral mortars intended for the laying of concrete pavers, natural stones and slabs indoors and outdoors.

• Suitable for private applications such as garden paths, patios and entrances.
• It can also, under certain conditions (depending on the proportions of the mixture), be used for more heavily used surfaces such as driveways or private car parks, squares and public paths.
• However, it is not suitable for areas subject to road traffic.

Properties and advantages:

• Indoor and outdoor application
• Ground application
• water permeable
• Enriched with trass
• Low shrinkage and low self-tension
• High resistance at start and end of set
• High resistance to frost and de-icing salts
• Mono-component

Remarks :

1. Protect the Knauf Drain binder throughout its setting from direct sunlight, draughts, driving rain, frost and excessively high (>30°C) or too low (<5°C) temperatures.
2. The technical data apply at a temperature of +20°C and a relative air humidity of 50%.
   Lower temperatures increase the indicated values, higher temperatures decrease them.
3. To apply the product, the ambient and surface temperature must be between +5°C and +30°C.
4. Do not mix with water once the product has hardened
5. Clean tools, containers, etc. immediately with water.
   In the solid state, only mechanical cleaning is possible.
6. Carry out a test on a small surface

Conditioning :

• 25 kg bag