Joint protector for walls and floors 250 ml - HG

Joint protector for walls and floors 250 ml - HG

This tile joint sealant makes joints completely waterproof against water , oil , grease and dirt .

It allows all joints to be optimally protected in no time at all.

• Makes joints impervious to oil, grease and moisture.
• Absolutely colorless.
• With dropper.

Many gaskets are porous and therefore easily absorb grease, dirt and limescale . The slightest drop of wine , soda or anything greasy on the joints, for example, will cause a stain that is difficult to remove .

In humid rooms such as the bathroom , joints can become clogged with limescale and mold , which is inelegant.

Also during cleaning, water containing impurities can run off the walls or floor and enter the joints. These clog up slowly but surely and it becomes extremely difficult to recover them.

Fortunately, this product offers optimal, colorless and transparent protection for bathroom tile joints .

Manual :

1. Start by cleaning the joints thoroughly with HG joint cleaner concentrate .
2. Rinse the joints with clean water and allow to dry thoroughly for 24 hours.
3. Allow new gaskets to harden and dry completely. For floor joints, preferably apply HG wall and floor joint protector using the pipette delivered with the product. For wall joints (kitchen/bathrooms), apply the product to the joints using a brush, for example.
4. Wipe off excess product from floor or wall tiles with a cloth.
5. The surface can be cleaned as usual after 36 to 48 hours drying time. With regard to floor joints, the surface can be walked on after about 3 hours. Shower floors can be used after 8 hours drying time.

Conditioning :

• Box of 250ml.

Consumption :

• 250 ml is enough to treat 30 to 40 m² of joint surface.