COTTO Wax-Finish - Final treatment of terracotta floors - Lithofin

This product is a sealer and protector for the final treatment of the protection of terracotta floors after treatment with Lithofin COTTO Pre-Wax .

It also allows the treatment of tiles already protected in the factory.

Packaging:
8 Items
€27.12Tax Included
€27.67- 2%

Volume discounts

QuantityYou SaveUnit price
23 %€26.84
34 %€26.57
55 %€26.29
1010 %€24.90
LIT 139-11-B
4001524013916

COTTO Wax-Finish - Final treatment of terracotta floors - Lithofin

This water-based, ready-to-use product is composed of superior natural waxes as well as additives.

Lithofin Cotto Wax-Finish forms a film that shines by itself and protects the floor.

The product forces impurities to stay on the surface and prevents them from penetrating

Maintenance is considerably facilitated by a reduction in surface roughness.

The appearance of the coating is improved while retaining its natural light shade.

The film reduces the diffusion of water vapour, is resistant to ultraviolet rays and does not yellow.

Lithofin Cotto Wax Finish resists abrasion very well and is easy to apply.

Technical specifications :

  • Density: 1.00 g/cm³
  • pH: 9 to 10
  • Flash point: approx. 85°C (cc)
  • Appearance: whitish emulsion/dispersion
  • Odor: almost none

Application domain :

Final treatment that gives a natural shine to interior flooring in Italian, Spanish, French terracotta and clay tiles etc.

Also suitable for pre-treated or waxed terracotta tiles.

For optimum protection of non-pre-treated absorbent terracotta, we recommend prior impregnation with Lithofin COTTO Pre-Wax or Lithofin Vlekstop W . In this case, the final color will be lighter.

Manual :

  1. Apply a copious and regular quantity of Lithofin Cotto Wax-Finish on the clean coating and with an applicator broom or sponge. You can also apply this product regularly with a garden sprayer and spread it immediately with a sponge.
  2. A second coat should be applied after a drying time of approximately 40-60 minutes. Avoid puddles or formation of “drops” or wipe them up immediately with diluted product.
  3. If the floor is very absorbent, a third coat may be necessary.
  4. On all pre-treated or waxed surfaces apply in thinner coats.
  5. Wash working instruments with water.
  6. Recommended temperature range for treatment: 5 to 25°

Yield :

  • Approx. 5 to 10 m²/litre on soft clay tiles, Spanish and French terracotta (for two coats).
  • Approx. 10 to 15 m²/litre on Florentine and Italian terracotta (for two coats).
  • Approx. 10 to 20 m²/litre on pre-impregnated, pre-treated or waxed surfaces.
Lithofin
LIT 139-11-B
8 Items

Data sheet

Signal word
As of Q2 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard statements
As of Q2 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard pictogram

Specific References

EAN13
4001524013916
There are no reviews for this product yet.

Customers who bought this product also bought: