LITHOFIN COTTO CLASSIC

Description:
A special product of LITHOFIN range for terracotta. This is a ready to use that contains silicone and acrylic resin dissolved in organic solvents. Lithofin Cotto CLASSIC hue penetrate porous surfaces and reduces or mitigates their porosity. The treated surface becomes waterproof. Coupled with the product Lithofin classic wax Cotto, Lithofin Cotto classic hue will give an optimum result in the conventional treatment method.

Technical specifications:

• Weight: about 0.83 g/cm3 (at 20 ° C)
• Flash point: 34 ° C
• Appearance: clear, colorless or slightly brown

Scope of application:
Treatment preliminary Italian terracotta-porous surfaces and the baked Earth especially. This method is not recommended for non-porous and also very porous terracotta as some French terracotta or from Spain as well as for outside applications.

Instructions for use:
The surface must be perfectly dry and clean, without any blemish. Shake the container or mix well the product before use. Then apply Lithofin Cotto classic colour uniformly with a brush or an applicateur; distribute it over the ground avoiding spills or drops (wipe immediately with a lint-free cloth if necessary).
Note: Before drying, irregular areas should be blurred with a cloth. Immediately after drying (20 to 60 min.), we must start the application of Lithofin classic wax Cotto. The temperature of the surface to be treated and the product must not exceed 30 ° C (it may be necessary to stop the floor heating if necessary) and joints must be carried out.
Performance: About 5 to 10 m²/litre on the basis of the porosity of the material.
Performance for daily cleaning machine:
2 litres/100 m² per month.

Storage:
In a room cool, and dry the container properly closed. Once opened, the product must be consumed quickly.

Complementary treatment:
Use Lithofin classic WAX Cotto. These two products are complementary and conventional treatment method.

Security:
Keep out of reach of children, ventilate the room during and after the application. Contains solvents. Classification according to the regulations on hazardous materials or directive 88/379 CE: flammable

Protection of the environment:
The tank is made of polyethylene (PE) non-polluting and recyclable. After rinsing and drying, cans can be integrated into the system of recovery of materials. Residues of products should be treated as special waste.

Packaging:
Bottle with safety Cap.