Sable pour joints DR+ - Nextgel - Dalles et pavés - Techniseal

Sand for joints DR + - Nextgel - slabs and pavers - Techniseal

Product of high technology, Grouting DR + NextGel for tiles and pavers sand is a mixture desable calibrated and Binder which applies to dry, compact, watered and hardens after drying. It is specially formulated for grouting tiles and pavers laid on soft ground (sand or sand stabilized).

Packaging:
Color:
€73.31Tax Included
TSEAL.151-H57
0773758004254

Sand for joints DR + - Nextgel - slabs and pavers - Techniseal

Applications:

  • Tiled or paved on soft floor surfaces (sand or sand stabilized): terraces, gone, entered the garage, etc.
  • Blocks of concrete, reconstituted stone ("wet-cast"), textured or clay pavers and natural stone. Attention however to the cobblestones and natural stone slabs, unfilled Spurs separators, and the lack of stability generates movements.
  • Use for private lanes, vehicles light and slow (max 30 km/h). For requirements on channels or public spaces, refer to CityPro® Techniseal® range.
  • SUR AN EVEN SURFACE, THIS PRODUCT OF TECHNOLOGY NEXTGELMC CAN BE USED AT THE SAME TIME THAT ANOTHER PRODUCT THAT HAS NOT NEXTGELMC TECHNOLOGY. < /li >

:

  • Apply dry, compact, watered and hardens after drying
  • Withstand unexpected rain after only 90 minutes * < /li>
  • Easy, clean and fast implementation.li >
  • Remains flexible, resists breakdown
  • Does not generate an efflorescence < /li>
  • Resists erosion, water, Frost, wind, cleaning, etc.
  • Reduced the growth of weeds.li >
  • Resists to the ants and other insects.li >
  • Stabilizes the books, follows the movements of the ground.li >
  • Use in new installation and renovation * although the product resists a downpour unexpected 90 minutes after his instsystem, it is recommended to allow 24 hours without rain in order to get optimal performance < /li>

Description:

Product of high technology, Grouting DR + NextGelMC for tiles and pavers sand is a mixture of calibrated sand and Binder which applies to dry, compact, watered and hardens after drying. It is specially formulated for grouting tiles and pavers laid on soft ground (sand or sand stabilized). It can be used in new installation, as an alternative to the classic sand joints, as in renovation. Ready to use, jointing sand DR + NextGelMC allows an easy, clean and fast jointing. It remains flexible and obeys the movements that could cause seals to burst. Permanently adheres to the walls of the slabs or pavers without ever contract. Its formulation avoids generating or transmitting of efflorescence. Unlike the classic sand, it remains perfectly stable and well in place. It prevents the growth of weeds and the invasion of insects. It can effectively withstand erosion caused by water, Frost, wind, cleaning, etc. It contributes to the cleanliness of the premises by preventing sand from joints to spread on the surface. It stabilizes the horizontal or sloping structures. To better resist ground movements, DR + NextGelMC jointing sand becomes supple when wet and is firming dries.

Consommation:

Indicative :

25 kg cover:

  • Blocks: 2 to 8 m2 < /.li >
  • Plates: 8 to 20 sqm < /.li >

The amount needed will depend on the shape and the size of the tiles or pavers, as well as the width of the joints. Density: 1 kg of sand Grouting DR + NextGelMC allows approximately 600 cm3 (0.6 liter) of joint. The density will vary according to the intensity of the compaction. For a more accurate assessment of your consumption of DR + NextGelMC, Techniseal® team is at your disposal for information.

Coloris:

  • TONE
  • STONE
  • GRAY
  • SAND
  • OCHRE
  • GRANITE
Techniseal
TSEAL.151-H57

Specific References

EAN13
0773758004254
There are no reviews for this product yet.