TECHNISIL HYDRO MORE

• TE for more than 10 years;
• Reports of trials on water absorption, scattering the steam and water on the accelerated aging.

Applications - Properties of materials:

• Waterproof protection and repellent of walls and facades of buildings private, public, structures (tunnels, bridges);
• High buildings and soil protection against pollution;
• Protection masks, anti-affiche, anti-cryptogamique, anti-fouling;
• Protection against bad weather, smog, acid rain and pollutants;
• Reduced the damage due to frost;
• Limits the formation of blooms by migration of water;
• Limit the penetration of water into the Interior;
• The reduction of water absorption allows the material to keep its thermal insulation properties;
• Easier maintenance of the support by the character self-cleaning of the repellent;
• …;

Properties:

• System non-film forming;
• Does not change the appearance of the support;
• Breathable material - permeable to water vapour;
• Free from solvent, odourless, non-toxic and non-flammable;
• Excellent aging, not yellowing;
• Sustainable treatment at the time;
• Slows down the trainingmicroorganism (mosses, lichens,...);
• Can be applied on damp or dry support, as well as fresh joints;

Implementation and precautions:
Implementation:

• The media must be healthy, clean, dusted and fat;
• Disinfect the bracket, eliminate mosses, algae and lichens using a fungicide type TECHNICIDE + (permission 1904 B No.);
• Clean up the frayed joints, sealing the cracks;
• Application to saturation, by brush, roller or spray (TECHNISPRAY 10) one to two successive layers (the second layer is sprayed onto the first still wet);
• Consumption: between 200 and 1500 ml/m² in total, depending on the porosity of the media;
• Determination of consumption and the efficiency of the treatment by the method with pipe glass;
• Treated the TECHNISIL HYDRO more support can be exposed to rain after +/-2 hours.

Notes and precautions:

• The temperature of the medium can never be less than 5 ° C;
• In all cases, the chassis and the glass must be protected, accidental stains should be immediately cleaned using water;
• The TECHNISIL HYDRO more cannot be applied on non-porous materials;
• Pre-test situ alwayss recommended;
• In the case of presence of salts in surface (saltpeter), we recommend to neutralize these salts (to the TECHNIROC) before the application of TECHNISIL HYDRO PLUS.

Technical characteristics:

• Density: 1 +/-0.01;
• Aspect: White liquid;
• Active ingredients: 8%;
• Ageing tests: less than 0.1 ml of absorption after 10 years (according to tv75 and ATG);
• Flash point: non-flammable; (contains no solvents)
• Ph: 8-9;
• Odor: none;
• Viscosity: INF. to 100 cPs (at 25 ° C);
• Modification of surface tension: 12 20 mN/m.
• Wetting angle: greater than 60 ° depending on Method used ASTM D5946;
• Water vapour permeability: coefficient µ INF. 10;
• Impermeability to water according to Test method glass Pipe: 100%;
• Maximum efficiency: after 7 days.
• Principle of action: hydrophobic and repellent.
• Bridging of cracks: contains a polyolefin resin that ponte cracks of 300 microns.

Packaging and storage:

Keep frost-free - Stockable 1 year