Marmor - Pre-coloured silicon - Akemi

(5/5) out of 1 total ratings

Specially used for grouting natural and artificial stones such as marble , granite , quartzite , sandstone, terrazzo, concrete etc.

Packaging:
Color code:
3 Items
€18.24Tax Included

Volume discounts

QuantityYou SaveUnit price
207 %€16.96
AKE 40201
4004208402013

Marmor - Pre-coloured silicon - Akemi

Specially used for grouting natural and artificial stones such as marble , granite , quartzite , sandstone, terrazzo, concrete etc.
The product also has good adhesion to plaster , ceramics , glass , wood , many metals and plastics.

Also suitable for areas with constant humidity and under water in swimming pools, saunas, steam baths as well as in tank construction (except structural colours).

Features :

  • No abnormal coloring on the edges.
  • Excellent implementation and perfect smoothing.
  • Fungicide.
  • 25% working range.
  • Skin formation 10 - 15 minutes.
  • Temperature resistance from -40°C to +150°C.
  • Excellent weather resistance.
  • Very good resistance to wear, resistant to tearing and notches.
  • Compatible with paint (cannot be painted).
  • Available in all colors.
  • Shelf life 12 months in a cool, dry place.
  • Resistant to chlorine at disinfection concentration rates for pool basins and with loads by mechanical cleaning method.

Use :

  1. Contact surfaces must be dry, clean, grease and dust free; cleaning with AKEMI Cleaner A of natural and artificial stones, tiles, ceramics, glass, varnished wood and metals; AKEMI Cleaner I for plastic materials and painted surfaces.
  2. Use the AKEMI joint bead to avoid triple adhesion of the sidewall and when the joints are deep; for any application in damp rooms and outdoors, use polyethylene jointing beads, otherwise polyurethane sponge jointing beads. Dimension of joints min. 3x5mm.
  3. Glue the surfaces at the joint lips with the AKEMI Adhesive Tape.
  4. In case of use in humid areas and outdoors, and on special substrates, we recommend that you paint the sides of the joints with our primers (see Primer table).
  5. Application temperature +5°C up to +35°C.
  6. Apply product and smooth over 5-10 minutes; the AKEMI Smoothing Palette and the AKEMI Smoothing Product provide optimal smoothing (except matte colors).
  7. Remove the adhesive strip by pulling it towards the joint before a skin forms.
  8. The solidification depends on the layer thickness, the temperature and the relative humidity of the air and amounts to approx. 1-3 mm. per 24 hour period.
  9. Tools can be cleaned with AKEMI Nettoyant A.

Conditioning :

310mL cartridge.

Akemi
AKE 40201
3 Items

Data sheet

Signal word
As of Q2 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard statements
As of Q2 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard pictogram

Specific References

EAN13
4004208402013
Avis

Très bon produit fiable facile à poser et très résistant

By Bruno T. the 04/26/2021