SikaFloor-2540 W - Two-component epoxy coating - Sika

SikaFloor-2540 W - Two-component epoxy coating - Sika

Sikafloor-2540 W is a colored coating with 2 components in aqueous phase based on epoxy resin , approved AgBB.

Features

• Low VOC and AMC emissions
• Low particulate emissions
• Good chemical and mechanical resistance
• Permeable to water vapor
• Water dilution
• Low odor
• Ease of application

Application areas

• Colored epoxy coating for concrete, cement screeds, broadcast systems and epoxy mortars.
• Suitable for normal to medium mechanical and chemical stresses.
• For production areas, warehouses, car park floors, garages, etc.

Application

1. Prior to application, confirm substrate moisture content, relative air humidity and dew point.
2. If the water content is above 6%, Sikafloor EpoCem can be applied as a temporary moisture barrier (TMB).

primer

1. Ensure that a continuous, pore-free layer covers the substrate.
2. If necessary, apply two coats of primer.
3. When used as a primer, always apply with a brush.

Sealcoat

1. Sikafloor-2540 W is evenly distributed using a short pile roller.
2. A seamless finish can be achieved if a "wet" edge is maintained during application.
3. Uneven application of material and resultant differences in coating layer thicknesses can cause differences in surface "gloss".

Aspect

• Resin - component A: liquid, colored
• Hardener - component B: liquid, transparent

Consumption

~ 0.2-0.3 kg/m² applied as coating set per roll.
These values are theoretical and do not take into account a certain number of elements that can increase them such as porosity, roughness, inequalities, losses, etc.

Conditioning

Kit A+B of 18 kg in light gray or flint grey.