Rénov' Gouttière - Waterproof renovation coat for gutters - Aquaplan

Rénov' Gouttière - Waterproof renovation coat for gutters - Aquaplan

Rénov' Gouttière is a solvent-free, odorless and ready-to-use coating, based on flexible hybrid polymers.
It is a self-leveling renovation coat for the long-lasting repair and protection of gutters made of common materials.

After curing, it forms a waterproof, maintenance-free, elastic and seamless coating.
Your gutters are thus protected against corrosion, acid rain, UV rays and other aggressive environmental influences.

Benefits :

• Resists all temperatures.
• Very elastic, covering cracks.
• Adheres to all common materials.

Application :

Use for gutters made from all common materials.

Useful information:

• Store in a cool place (max 25°C) and protected from frost.
• Do not apply if the ambient temperature and that of the substrate are below +5°C.
• Shelf life: Minimum 12 months in an unopened container.
  The shelf life of opened packaging is limited.
• Shake well before use and close carefully.
• Passable with (rain) water after 12 o'clock.
  Full cure after 36 hours (depending on ambient conditions).
• This product covers 2 m²/L, with 2.5 L you can therefore cover an area of 5 m² or 10 running meters of gutters.

Manual :

1. Dry, dust and degrease the support first.
2. Roughen the surface to be treated by working intensively with a steel brush and degrease with a solution of water and ammonia or a synthetic degreaser.
   NOTE: Treat new metal only after 6 months.
3. Seal visible holes with a piece of tape to prevent seepage.
4. Pour RENOVATEUR GOUTTIERE on the prepared support and spread it immediately with a brush at a rate of 0.450 to 0.500 L/m² (layer thickness = ± 0.5 mm).
   One layer is enough.
   In extreme cases, a second coat can be applied after 24 hours.
5. Reinforce larger cracks with an Anti-Fissures polyester fabric between 2 layers RENOVATEUR GOUTTIERE.

Conditioning :

• 2.5 L container.
• Grey color.

Former name: Zinc Renovator - Waterproof renovating layer - Aquaplan