SikaGard-6250 S - Thixotropic Wax - Sika

SikaGard-6250 S is an easy-to-use white aerosol wax with excellent anti-corrosion properties.

8 Items
€14.28Tax Included
€16.80- 15%

Volume discounts

QuantityYou SaveUnit price
520 %€13.44
SIK 440219
9145385942635

SikaGard-6250 S - Thixotropic Wax - Sika

SikaGard-6250 S is a white wax without aromatic solvent which has excellent anti-corrosion properties.
It effectively protects car body cavities against corrosion , it is easy to apply and has excellent final properties.

SikaGard-6250 S is very heat resistant.
After drying, a slightly sticky white wax film remains which protects the cavities from corrosion.

Features

  • Independent accessory (aerosol)
  • Excellent resistance to road salt
  • Very good ability to form a film
  • Exceptional sealing
  • Good behavior at low temperature
  • Resists high temperatures
  • Does not drip during application
  • Always flexible

Application areas

  • SikaGard-6250 S is a sprayable anti-corrosion coating for the repair and protection of hard-to-reach areas of vehicles such as door panel cavities, side panels, engine hoods, trunk lids, fenders , sills, reinforcements and uprights.
  • Thanks to its very high temperature resistance (up to 180°C), SikaGard-6250 S can also be used for engine protection.
  • The product can be sprayed without forming a mist and does not run into the evacuation openings.
  • The SikaGard-6250 S has very good adhesion on different paints: primed metals, metals and PVC without any pre-treatment.
  • This product is exclusively reserved for professionals.
    Tests on real substrates must be carried out to check the adhesion and compatibility of the product.

Application

  1. Shake the can approximately 40 times before use.
  2. Protect surrounding areas before spraying.
  3. Spray at room temperature and at a distance of 25 cm from the surface or into the cavity.
  4. To reach the cavities, use an additional extension hose.
  5. Use existing access points or create new ones by drilling through holes.
  6. Make sure to deposit a continuous film of product.
  7. Hold can upright and do not spray brake systems or exhaust.
  8. After use, invert can and spray in short bursts to clean nozzle.
  9. Due to the flammable propellant gas, ventilate the cavities during the drying time or before closing the cavities.

Conditioning

500 ml in Translucent White.

Sika
SIK 440219
8 Items

Data sheet

Signal word
DANGER
Hazard statements
H222 – Extremely flammable aerosol.
H229 – Pressurised container: May burst if heated.
H315 – Causes skin irritation.
H336 – May cause drowsiness or dizziness.
H411 – Toxic to aquatic life with long lasting effects.
Hazard pictogram
Hazard pictogram : GHS02 - Flammable GHS02 - Flammable
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
Hazard pictogram : GHS09 - Environmental hazard GHS09 - Environmental hazard
 

Specific References

EAN13
9145385942635

Download

fact sheet-social security-sikag

The SikaGard-6250 S product safety data sheet

Download (564.07KB)
There are no reviews for this product yet.

Customers who bought this product also bought: