SikaSwell-A 2010 - Water swellable acrylic joint profile - Sika

SikaSwell-A 2010 - Water swellable acrylic joint profile - Sika

SikaSwell A is an acrylic cord that swells in contact with water, which is used to ensure the connection between sails/slabs and concreting joints for all types of joints and penetrations in concrete.
It has a rectangular profile and is available in several sizes.

Features

• Easy to apply
• Can be applied on different substrates
• Very economical
• Swells on contact with water
• Expansion in cracks and free spaces
• Long-term effectiveness tested
• Resistant to water and various chemicals
• Does not require curing time
• Does not require soldering
• Adaptable and therefore applicable for many details
• Available in different types and sizes

Application areas

Grouting of:

• construction joints
• Passages of pipes and anchors through walls and floors
• Construction joints of wiring ducts, etc.
• Around all kinds of penetrations through concrete

Application

Application of SikaSwell S-2 sealant

1. Apply SikaSwell S-2 in a narrow triangular band (triangular nozzle size ~5mm) to the prepared substrate.
2. Extrude a sufficient amount to compensate for the roughness of the surface to be leveled.
3. View SikaSwell S-2 Technical Data Sheet

Application of SikaSwell A

1. Cut the SikaSwell A profile to the desired length.
2. Firmly pack the SikaSwell A profile into the freshly applied SikaSwell S-2 until a small amount is extruded from both sides of the profile to achieve full adhesion to the surface.
3. Profiles should be placed in max. 30 minutes.
4. Connections and corners must be butted and secured.
5. Allow SikaSwell S-2 to cure for 2-3 hours before pouring concrete.
6. Protect the SikaSwell A profiles against water (eg rain) until the pouring of the concrete.

Format

10m x 20mm x 10mm roll.