Betolub W - Water-based release oil - Zep Industries

Betolub W - Water-based release oil - Zep Industries

Water -based and biodegradable carbide -based release oil , added active elements and emulsifiers.
Forms a stable emulsion, even in hard water.
Used as an aqueous emulsion mainly for absorbent formwork (wood) for pouring mortar and concrete.

Properties :

• BETOLUB W is a release agent that mixes with water, and can be used in application to (mainly) absorbent formwork such as wood, in the ceramic industry (e.g. plaster), but also as a maintenance tool for shelves.
• In the construction of asphalt roads, it prevents the products to be mixed from sticking together.
• Forms a stable emulsion, even in hard water.
• Used as an aqueous emulsion mainly for absorbent formwork (wood) for pouring concrete mortar.
• For maintaining boards and also in the ceramic industry (e.g., plaster).
• BETOLUB W is based on Triglyceride and is readily biodegradable.

Applications:

Formwork oil can be dangerous for workers handling concrete.
Respiratory and skin protection may be required. After use, the formwork timber ends up in construction waste.
The formwork oil ends up directly in nature.

That's why biodegradable formwork oil deserves preference.
This one does not cause environmental pollution and is better for health.
In winter, vegetable formwork oil seems not to resist washing away by rainwater and, moreover, it is difficult to apply because of the cold.
In addition, the concrete surface will be stained.

Instructions for use:

1. Betolub W must be added to a dose of water by stirring and emulsifying – NEVER THE OTHER WAY AROUND!
2. Then add the rest of the water while stirring.
   Polluted water reduces the stability of the emulsion.
3. For concrete demolding, a mixture of 1:5 to 1:10 is required, and for the asphalt industry, a mixture of 1:10 to 1:20 is recommended.
   In both cases, it is possible to use lower concentrations.

Packaging:

20 L.

FAQ - Frequently Asked Questions

1. Does Betolub W contain solvents?
   No, it is a water-based product, without aggressive solvents, ideal for confined or sensitive environments.
2. Can it be used on metal formwork?
   Yes, it is perfectly suited to metal formwork and even helps to reduce oxidation.
3. Is the product compatible with all concrete mixes?
   Yes, Betolub W works on most types of concrete: conventional, high performance, fiber-reinforced, self-compacting (SCC), etc.
4. Should Betolub W be diluted?
   No, it's ready to use. Just apply it as is.
5. Does the product influence the color of the concrete?
   No, it does not leave colored traces and does not alter the original color of the concrete.
6. Can concrete be painted or treated after using Betolub W?
   Yes, its formulation allows good compatibility with paints, stains and coatings (after the concrete has dried).
7. How do I clean the equipment after use?
   A simple rinse with water is sufficient, as the product is not greasy like a classic oil.
8. What is the average consumption per m²?
   On average 15 to 30 m²/litre, depending on the porosity and condition of the formwork.
9. Is the product dangerous for the user?
   No, Betolub W is considered non-hazardous, but the use of gloves is recommended for prolonged handling.
10. Can it be used in winter?
    Yes, as long as the product doesn't freeze. It is recommended to store it at a positive temperature.