Betolub - Mold Release Oil - Zep Industries

Betolub - Mold Release Oil - Zep Industries

Ready-to-use release oil with anti-stick agent that allows extremely easy release of concrete after setting.
It is suitable for concrete production with immediate or delayed demolding , and can be steamed up to 80°C.
Betolub protects metal molds against corrosion and resists washing away by rainwater.

Properties :

• Betolub preserves the desired characteristics on the surface of the concrete.
• Ensures sharpness of surfaces, edges and contours.
• Allows for the subsequent application of paints, coatings or plaster without any problems.
• Betolub is suitable for all formwork (metal, wood, plastic) and extends its service life.

Instructions for use:

1. Ready to use. Can be applied using standard methods on all formwork using a sprayer, sponge or cloth.
2. The best result is obtained by uniform application of a very thin film, without gaps or excess.
3. Consumption :
   Metal and plastic molds: 1 liter for approximately 35 m².
   Wooden molds: 1 liter for approximately 25m².

Packaging:

20 L and 1000 L.

FAQ - Frequently Asked Questions

1. On what types of formwork can Betolub be used?
   Betolub is compatible with metal, wood, plastic, plywood and composites. It is suitable for both industrial molds and traditional construction site formwork.
2. Does Betolub change the color of concrete?
   No, when used correctly, the oil does not alter the color of the concrete and does not cause stains, even on architectural concrete.
3. Can Betolub be applied by spraying?
   Yes, it is perfectly suited for spraying, allowing for quick, even and economical application.
4. Is it effective in cold or wet conditions?
   Betolub remains effective even under difficult construction site conditions. However, as with all release oils, it is recommended to avoid application on soaked surfaces.
5. Is Betolub dangerous for wooden formwork?
   No, on the contrary, it limits absorption by the wood and protects the formwork from moisture, prolonging its lifespan.
6. How much should be applied?
   A very thin application is sufficient. Generally, 10 to 20 m²/L depending on the substrate and the condition of the formwork.
7. Is Betolub suitable for professional construction sites?
   Yes, this is a professional product, widely used in construction, civil engineering and prefabrication.