Béton Ciré Guard Finish - Finishing wax - Guard Industrie

Béton Ciré Guard Finish - Finishing wax - Guard Industrie

Ciré Concrete Guard Finish is an acrylic emulsion containing metal ions providing a high resistance wear layer.

Subsequently, it can be diluted in washing water for regular maintenance (1 volume for 9 volumes of water).
It allows you to regenerate the new and shiny appearance of polished concrete , to maintain its clean condition much longer and to fill in micro-scratches.

Advantages

• Creates a non-slippery wear layer, helping to prolong the cleanliness of the protected surface.
• Makes cleaning easier.
• Good resistance to abrasion and scratches.
• Gives a shiny appearance
• Use ready to use for the first application and diluted for maintenance.
• Applies horizontally and indoors.

Use

• Used on fine smoothed concrete slabs, fine smoothed self-leveling cement screeds or leveling surfaces
• Floors
• New or old
• Interior
• offices, public spaces with moderate traffic, floors of individual houses, etc.

Implementation

Preparation of the support

1. Apply the product to a clean, dust-free and dry surface.
2. Shake the packaging carefully before each use and carry out a preliminary test.

Application

1. Always start in a back corner of the room and move back as you go.
2. Apply in 2 pure coats.
3. Moisten the tool with water and spread a first layer of product by pressing it.
4. Spread the product thinly, forming figures of 8 with the application tool.
   Always overlap the previous passage by about 5 cm.
5. Smooth the surface with the tool to standardize the product (remove overcoats and fill in gaps).
6. Apply a 2nd coat in the same way as the 1st coat.
7. Minimum drying time between each pass: 1 hour at 20°C.
8. It is possible after the last coat (let dry for a minimum of 12 hours and a maximum of 24 hours) to buff using a high-speed single brush (400 rpm) fitted with a white disc or pad to reinforce the shine and resistance.
9. Drying before light recirculation: 6 hours
10. Drying before total recirculation: 24 hours

Application tools

Apply preferably using a microfiber flat broom or a dampening muff.
Always use a clean tool dedicated to this product.

Consumption

The values below are given for information purposes only:

Pure: 10 to 15 m2 / liter for 2 coats.
Diluted (maintenance): 20 to 30 m2 / liter.

Conditioning

5 L.