Purigo Sol - Film-forming surface hardener and dust suppressant - Sika

(5/5) out of 3 total ratings

Purigo Sol is a ready-to-use, single-component white liquid based on synthetic resin and active mineral compounds.

Packaging:
7 Items
€84.84Tax Included

Volume discounts

QuantityYou SaveUnit price
22 %€83.14
45 %€80.60
810 %€76.36
SIK 7097
3240240002021

Purigo Sol - Film-forming surface hardener and dust suppressant - Sika

Purigo Sol is a white, ready-to-use liquid based on synthetic resin and active mineral compounds .

Features

  • Hardening by reaction with the lime of the cement to form mineral compounds which are distributed in the crystalline structure of the hardened mortar.
  • Strong reduction of dust thanks to the coating of the grains by the polymerizable resin which penetrates over a few millimeters.
  • Reduction of porosity and capillarity by formation of hydrated insoluble salts which block pores and capillaries.
  • Increased chemical resistance, a consequence of the previous effects: Purigo Sol provides better protection against diluted fats, oils, organic acids and bases.

Application areas

  • Purigo Sol is used for the superficial reinforcement of screeds and floor coatings, new or old, in order to improve their resistance to abrasion and make them easier to clean.
  • Purigo Sol hardens the surface of mortars or limestone facings that must withstand aggressive environments (marine, industrial or urban atmosphere).

Application

  1. The support must be clean and dry.
  2. New mortars will be at least 7 days old.
  3. In particular, they will be freed from traces of oil, grease, paint, etc.
  4. They must have sufficient mechanical resistance:
    a cohesion of at least 1 N/mm² in the direct tensile test.
    a compressive strength of at least 25 N/mm².
  5. Purigo Sol cannot overcome a lack of mechanical strength or a low cement content in the substrate.
  6. Purigo Sol is applied in a single impregnation by roller, brush or spray.
  7. Avoid overconsumption and drippings.

Consumption

Variable according to the porosity of the support.
As an indication, the average consumption on mortar or concrete is 0.150 to 0.300 l/m².
Excessive consumption can cause whitish efflorescences.

Conditioning

5 L and 20 L container.

Sika
SIK 7097
7 Items

Data sheet

Signal word
WARNING
Hazard statements
H317 – May cause an allergic skin reaction.
Hazard pictogram
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
 

Specific References

EAN13
3240240002021
Garage

Application dans un garage en 3 couches car la première a fait remonter des restes de l'aisance. Résultats satisfaisant. Plus de poussière.

By Benoit B. the 03/07/2022
Purigosol Sika

Très bon produit, efficace si les recommandations de pose sont respectées.

By Manach J. the 03/03/2021
Durcisseur de surfaces

Produit conforme et efficace

By Brigitte E. the 08/30/2020

You might also like