Vlekstop W - Special impregnation for brick, stone and concrete - Lithofin

Vlekstop W - Special impregnation for brick, stone and concrete - Lithofin

Lithofin Vlekstop W = Lithofin Fleckstop W

This special product is a water-soluble impregnation. It is solvent-free, ready-to-use and contains highly effective polymers and special additives that significantly prevent oil and water penetration.

It penetrates into absorbent, porous surfaces and immediately creates a very thin and invisible film in the capillaries.

The latter reduces absorption and greatly prevents the penetration of oil and grease which can cause stains.

The dirt therefore remains on the surface from where it can easily be wiped off. The appearance of the treated surface changes little or not at all.

Technical specifications :

• Density: approx. 1.0g/cm3
• pH: approx. 4.5
• Appearance: clear, yellowish
• Odor: almost odorless

Application domain :

This product can be used both indoors and outdoors as an easy-care, stain-resistant protective treatment in stain-sensitive areas such as kitchens and dining areas, as well as for tables, worktops, work and the like.

The surfaces can be polished, finely smoothed or roughened.

Note: for polished surfaces sensitive to acids (marble, etc.) as well as on fine porcelain stoneware, the compatibility of the product must always be tested beforehand. This is also recommended for all surfaces previously treated with other products.

Yield :

• Absorbent surfaces, e.g. sandstone: approx. 7 m²/L
• Raw concrete slabs: approx. 10 m²/L
• Polished natural stones: up to 20 m²/L

Vlekstop W - Special water-soluble impregnation - Lithofin