MN Couleur Plus - Intensifies colors and deepens the structure - Lithofin
This product is a solvent-based impregnation for improving the appearance of natural stone coverings and concrete slabs , rough and absorbent .
It intensifies the colors and deepens the structure, makes water repellent and repels dirt .
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
2 | 3 % | €27.90 |
3 | 4 % | €27.61 |
5 | 5 % | €27.33 |
10 | 10 % | €25.89 |
MN Couleur Plus - Intensifies colors and deepens the structure - Lithofin
Lithofin MN Color Plus is a special product for marble, natural stone and artificial stone.
It is a ready-to-use impregnating product based on silicones and special additives dissolved in organic solvents to enhance the colours.
Lithofin MN Color Plus penetrates the stone to make it water-repellent and enhance its color and structure without producing shine.
This product intensifies the color and gives a wet look. Once treated, the surface is more stain resistant and easier to maintain.
Lithofin MN Couleur Plus leaves no film, which allows vapor permeability to be maintained.
Technical specifications :
- Density: approx. 0.85g/cm³
- Appearance: colorless, transparent
- Smell: aromatic, gasoline
- Flash point: 36°C (cC)
Area of use :
Lithofin MN Color Plus is suitable for all absorbent and porous natural stones with a rough, sawn or honed finish such as granite, gneiss, porphyry, limestone, schist, Solnhofen slabs or artificial stone and concrete.
It intensifies the color of wall or floor coverings, stairs, terraces whose appearance is too bland or whose color must match that of a polished surface.
Please note: not suitable for non-absorbent, polished, highly honed or fired surfaces such as Dutch brick, porcelain stoneware, etc. If in doubt, test on an inconspicuous surface.
Manual :
- Apply a thin even layer of Lithofin MN Couleur Plus with a clean roller, an applicator broom or a brush and allow to penetrate.
- Highly absorbent surfaces may require a second coat.
- A layer that is too thick may cause surfaces that are not very absorbent to shine. To avoid this shine, remove the excess with a lint-free cloth.
Note: Sensitive surfaces such as glass, wood, lacquer, plastic and the like must be protected from splashes. Do not apply in direct sunlight or at temperatures below 5°C and above 25°C.
Yield :
- approximately 7 to 15 m²/L.
Data sheet
- Signal word
- DANGER
- Hazard statements
- H226 – Flammable liquid and vapour
H304 – May be fatal if swallowed and enters airways.
H315 – Causes skin irritation.
H335 – May cause respiratory irritation.
H336 – May cause drowsiness or dizziness.
H412 – Harmful to aquatic life with long lasting effects. - Hazard pictogram
-
GHS02 - FlammableGHS07 - HarmfulGHS08 - Health hazard
Specific References
- EAN13
- 4001524016719
Pas encore essayé dc...pas d'avis pr l'instant. Pas oleofuge?
Je tiens à souligner que le vendeur que j'ai entendu par téléphone lorsque je lui ai demandé des renseignements au sujet de mon achat éventuel était plus qu'aimable et efficace , d'où j'ai acheté le produit. Avec toute ma sympathie. Jean Dupont.
Commande reçu rapidement, merci.
Permet de retrouver une jolie couleur du granit et le protège
Facile à appliquer Très beau rendu des nervures et couleur de la pierre naturelle Très bon produit