Double action: protects the joints and simplifies cleaning.
Odorless.
Dries very quickly.
Products of water, more respectful of the environment.
Product at very low VOC emissions: certified by GEV and bearing the label EC1PLUS.
Performance: Product ready to use, no dilution required.
A bottle of 500 ml will cover a surface of 50 m² with tiles 10 x 10 and the joints of 0.5 cm.
A bottle of 500 ml will cover an area of 375 m² with 30 x 30 tiles and joints of 0.2 cm.
Application:
Pour the product into a suitable container and apply it evenly with a brush to the level of the joint.
Remove the burrs on the tiles with paper towel or clean cloth.
Let dry. After an hour the surface can be trampled. The product can be applied directly with a brush after pouring it in a suitable container. Any excess product on the tile must be removed immediately with a clean cloth or paper. For the protection of the mosaics composed of small tesserae, it is recommended to apply the product on the surface and then eliminate the product in excess on the tesserae with absorbent paper or a clean cloth.