FILAPRW200 - Protector before Grouting - Fila

FILAPRW200 - Protector before Grouting - Fila

• Waterproofing against dirt of pose effective water-based, which facilitates the Grouting operation and subsequent cleaning without altering the appearance of the materials.
• Ideal for absorbent materials such as terracotta, stretched sandstone, natural stone, reconstituted stone and agglomerates.
• Available in 1 liter of product.

Benefits:

• Protects the Grouting.
• Does not affect the adhesion of the seal on the material.
• Simplifies the cleaning after laying.
• Reduces drying time by allowing more quickly perform the following processing.
• Does not change the appearance and does not damage the material.
• Easy to apply.
• After applying the product, all treatments of protection are possible.
• Product at very low VOC emissions: certified by GEV and bearing the label EC1PLUS.

Application: 

Shake before use. Remove any dust on the surface to be treated. The product can also be applied with a brush or with a cloth. Carefully apply also on the edges of the placed material. The day following the application, Grouting can be done by making sure to mop up the mortar until it dries completely. When drying is complete, perform the wash after laying with the cleaner best suited to the type of material. Evaluate the following protection treatment for complete protection. RESERVED for professional use: on a vertical surface, apply a spray (airless) by dosing the product to distribute and system using PPE appropriate, as stated in the safety data sheet.

Performance: 

• For surfaces in Earth cooked (Imprunetino rustic and polished), 1 litre of FILAPRW200 will cover 15-20 m².
• For brick surfaces in terracotta (handmade, earthenware to Spain, flat and bricks), 1 litre of FILAPRW200 will cover 7-10 m².
• For surfaces of stone, 1 liter of FILAPRW200 will cover 10-20 m².

Caution: Test the product on a small area to check possible changes of color. Do not apply in the event of rain forecast.