Transformer Max - Akemi

Transformer Max - Akemi

Weatherproof product for strong and durable intensification indoors and outdoors.
Specially designed to harmonize the color of edges and drainers (lightened after machining) with the resin-coated (dark) surfaces of worktops.

For natural stone , terrazzo, agglomerated concrete and composites.
For brushed, satin-brushed, finely honed and polished surfaces.

Features :

• Intensifies the natural color and structure of flamed, brushed, satin-brushed, finely honed and polished stones
• Very fast solvent evaporation
• Onset of very rapid color intensification
• Very high yield
• Maintains shine of polish
• Does not form a film on the surface of the stone
• Let the treated stone breathe
• Excellent weather and weather resistance
• No yellowing
• After hardening, no health risk in case of contact with food; approved by an external German research center
• Little smell
• Indoor or outdoor use
• Water and dirt repellent effect
• Emission class A+ (confirmed by an external research center)
• Efficacy reaction (20°C): 5 - 10 min.
• Higher yield: (30-50 m²/l on polished surfaces).

Use :

1. Cleaning: The surface must be clean, completely dry and without any residue.
   On the outside, it must not contain salt residues (nitrates, sulphates, chloride) which could reduce the absorption of the active agents.
   Rinse very carefully with clean water after cleaning.
   Before the treatment of the stone, it must be completely dry, which requires at best a wait of 24 to 48 hours after cleaning.
   The temperature of the objects is between 15 and 25°C as well as a protection against the rain of 24 hours.
   The surface must not be heated either by underfloor heating or by sunlight.
2. Apply a thin, even coat of undiluted product with a brush, wetting broom or sprayer and allow to penetrate.
3. About 5 to 10 minutes after application and at the start of drying, remove the excess with a soft, absorbent cloth.
   On poorly absorbent surfaces leave to act for a minimum of 60 minutes to increase color intensification.
4. Highly absorbent surfaces will require multiple applications within 1-2 hours.
5. Tools can be cleaned with AKEMI Nitro Thinner.
6. For routine cleaning, use AKEMI Soap for Stone or Crystal Clean.

Conditioning :

• 250ml
• 1L
• 5L