Sika Primer-210 - Special primer for metals and plastics - Sika

Sika Primer-210 - Special primer for metals and plastics - Sika

Sika Primer-210 is a colorless, slightly yellowish primer based on solvents , which reacts to humidity in the air and forms a thin layer.
This layer serves as a bridge between the substrate and the glue.
Sika Primer-210 is specially formulated for the treatment of surfaces before application of single-component polyurethane Sika.

Features

• Solvent based
• Surface treatment
• Colorless, slightly yellow

Application areas

• Sika Primer-210 is used to improve adhesion on metals, such as aluminum, steel and non-ferrous metals.
• The primer can also be used to improve adhesion with Sikasil sealants and adhesives.
• This product is exclusively reserved for professionals.
  Always pre-test on original substrates and under local conditions to ensure adhesion and compatibility of adhesive and material.

Application

1. Apply a thin but well-covering layer of Sika Primer-210 with a brush, felt-tip pen, lint-free cloth or foam applicator.
2. The Sika Primer-210 presents a thermoplastic behavior during the 3 days following its application, therefore it is important to avoid high temperatures or early loading of the adhesion surface.
3. The ideal application temperature for the product and substrates is between 15°C and 25°C.
4. Apply Sika Primer-210 in one coat.
5. Make sure that this layer is well covered.
6. Carefully close the bottle immediately after use.

Consumption

Dependent on substrate porosity
~50ml/m2

Conditioning

• 250ml bottle
• 1 liter container