Acrimur AV - Multipurpose Paint - Zep Industries

Acrimur AV - Multipurpose Paint - Zep Industries

Versatile undercoat and topcoat paint for interior use , made of matte, water-based acrylic with high coverage.
Easy and pleasant to apply and washable.

Properties :

• Odorless.
• Very low VOC content
• Can be tinted with universal dyes at a maximum dose of 3%.
• Coating for interior surfaces such as walls, ceilings, decoration of dry rooms.
• Applicable on preparation coatings, plaster and derivatives, concrete and cement coatings, old adherent paints.
• Meets all the strictest regulations and provisions of the European Ecolabel.

Instructions for use:

1. The surface must be dry, clean and grease-free.
2. ACRIMUR AV is applied in two coats:
   With a brush and long-pile roller: dilute from 0 to 3%.
   With an airless nozzle of 21/000 to 24/000 of an inch, angle 60 to 80°, 60 mesh filter: dilute from 5 to 7%.
   Thinner: water.

Packaging:

25 kg.

FAQ - Frequently Asked Questions

1. Can Acrimur AV be used outdoors?
   Yes, its weather-resistant acrylic formula allows it to be applied both indoors and outdoors.
2. Should a primer be applied?
   On porous, highly absorbent or metallic surfaces, an undercoat is recommended to optimize adhesion and finish.
3. How long should you wait between coats?
   On average, between 4 and 6 hours. This can vary depending on the temperature and humidity level.
4. Is the paint washable?
   Yes, after complete drying (24 to 48 hours), the film is resistant and can be easily maintained.
5. Can it be applied with a spray gun?
   Yes, Acrimur AV is perfectly compatible with spray gun application after possible dilution.
6. What is the shelf life?
   Unopened, the paint can be stored for approximately 12 months in a dry place and protected from frost.
7. Does Acrimur AV have a strong odor?
   No, being water-based, it has a low odor and is suitable for occupied areas.
8. What is the exact yield?
   Between 8 and 12 m²/L, depending on the porosity of the substrate and the tool used.
9. Can it be used on raw metal?
   On bare metal, an anti-rust primer must be applied before Acrimur AV.