SikaPower-2925 - Plastic Repair - Sika

(5/5) out of 3 total ratings

SikaPower-2925 is a two-component PU glue for repairing small plastic parts.

Replaced by Sikaforce- 302 - Purform adhesive for plastic repair

29 Items
€24.68Tax Included
SIK 505374
9145385955703

SikaPower-2925 - Plastic Repair - Sika

Replaced by Sikaforce- 302 - Purform adhesive for plastic repair

SikaPower-2925 is a two-component PU glue for repairing small plastic parts.

Features

  • 90 seconds open time
  • Easy and very quick sanding (after 10 min)
  • Thixotropic, does not flow, suitable for vertical applications
  • Good shock resistance
  • Without withdrawal
  • Suitable for most plastics

Application areas

SikaPower-2925 is a very fast two-component polyurethane glue intended for the repair and reconstruction of small plastic parts (headlight optic tabs, broken or missing bumper mounting brackets).

Application

Reconstruction of a broken or missing bracket

  1. Drill a few holes on the part to be glued using a drill.
  2. Dry sand the surface with 180 grit.
  3. Clean the surface with Sika Cleaner G+P with a cloth.
    Leave to dry and ensure that there is no more moisture.
  4. Spray a thin layer of SikaPower-2900 Primer on both sides to be glued.
    Leave to dry for 5 minutes (1).
  5. Draw the shape of the broken fastener and the bonding area on the plastic modeling film.
  6. Apply SikaPower-2925 glue to the drawn shape.
  7. Press the glue onto the inside of the area to be repaired and fold the film over the outside.
  8. Press the 2 parts and wait for the glue to set (10 min).
  9. After hardening, restore the fixing bracket to its original shape.

Repairing a broken plastic part

  1. Grind the edges of the broken parts into a V shape (approx. 1 cm).
    Then sand with 80 grit.
  2. Clean the surface with Sika Cleaner G+P with a cloth.
    Leave to dry and ensure that there is no more moisture.
  3. Spray a thin layer of SikaPower-2900 Primer on both sides.
    Leave to dry for 5 minutes (1).
  4. Place the broken part on the plastic modeling film and apply SikaPower-2925 glue to the edge of the part.
  5. Assemble the 2 parts to be glued.
  6. Fill the V part with glue.
  7. Fold the film, squeeze the glue.
    Wait for the glue to completely harden.

Conditioning

50 ml cartridge with 3 static mixers

Sika
SIK 505374
29 Items

Data sheet

Signal word
DANGER
Hazard statements
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H332 – Harmful if inhaled.
H332 – Harmful if inhaled.
H335 – May cause respiratory irritation.
H351 – Suspected of causing cancer.
H373 – May cause damage to organs.
Hazard pictogram
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
Hazard pictogram : GHS08 - Health hazard GHS08 - Health hazard
 

Specific References

EAN13
9145385955703
SikaPower 2925

Convient très bien pour réparation ABS

By Paul H. the 01/24/2023
Parfait

Produit efficace, la prise est très rapide sur quasiment tout supports

By Bernard R. the 11/19/2021
excellent produit pour toutes réparations carrosserie

excellent produit pour réparation pour matiere plastique ,style pare-choc et autre , produit facile a utilisé , attention sèche vite ( 10 minutes ) , conseil pour des petites interventions , évité de prendre un mélangeur qui vous fait perdre beaucoup de produit car plus utilisable , prendre un carton et un tournevis et faite le mélange .

By Patrick B. the 02/06/2020

You might also like

Customers who bought this product also bought: