Primer Guard Color Concrete Special - Colored bonding primer - Guard Industrie

Primaire Guard Color Concrete Special - Colored bonding primer - Guard Industrie

Primary improving the hooking of dual-component products on all types of concrete.

Primary Guard Color Special Concrete is a product intended to be used as a primary before any application of the two-component products of the Guard Industry range: ProtectGuard Color Bi-component or AntiGraffiti Guard Special Concrete.

Primary Guard Color Special Concrete facilitates adhesion by its ability to attach strongly to the material and thus ensures the perfect hold of two-component products. It also allows to homogenize the color of the medium avnat the application of the color protection.

Primary Guard Color is an impregnating product, it leaves the support permeable to air and water vapour.

Benefits:

• Ensures the perfect adhesion of two-component products
• Homogenizes support before protection
• 40 standard colours
• Lets the support breathe

Use

• All types of concrete: current, armed, fibrous, high performance (BFUHP, RCMP...)
• Facades
• New or old
• Outdoors and indoors

Preparing support:

• Apply the product to a clean, dusted, grease-free and dry surface.

Application:

• Use the product in its purest form: do not dilute.
• Shake the packaging well for one minute before use and do a pre-test.
• Apply in a pass from bottom to top.
• It is imperative that Primary Guard Color Special Concrete has a sticky effect on the pressure of the finger. If not, apply a new layer.
• Primary Guard Color Special Concrete must remain out of dust for the first 3 hours after application.
• Primary Guard Color Special Concrete is recoverable in 4 hours at a temperature of 20oC. However, it is recommended to apply the two-component product sold with a period of 4 hours to 48 hours following the application of Primary Guard Color Special Concrete.

Application tools:

Apply to assisted air sprayer or roller.

Consumption:

8 to 15 sqm/L.

Color chart: