Adjustable pedestal 18 to 1083 mm - LINE ECO

Adjustable pedestal 18 to 1083 mm - LINE ECO

Adjustable polypropylene stud for terrace and slab in wood, ceramic, natural stone,... including for heights greater than 1 meter.

TIP 1: The legs of the LINE ECO studs are marked to facilitate cutting for laying against the walls and in the corners in order to be able to approach the head of the studs are the walls.

TIP 2: Clamping rings can be used for high pitches to freeze the height of the stud in case of too much vibration nearby. This forms a counter nut to eliminate loosening by creating friction blockage and better distribution of forces on the screwing nets.

Advantages of LINE ECO studs.

• Quick mounting and adjustment of height and leveling.
• Wide head
• Anti-unscrew clips
• The large foot base eliminates the need for anchoring joints or mortar and ensures stability.
• Anti-unscrew click
• A slope corrector can be placed under the stud
• Resistant to atmospheric, UV and most chemical reactions

The interest of using terrace studs.

• No formation of puddles on the terrace due to the spacing of the joints on the feet. There is no accumulation of water on the pavement.
• Wood or slab cladding can be freely installed on the sealing or thermal insulation.
• The installation of fittings or wiring can be carried out later, discreetly and remain accessible.
• Can be installed by all weather conditions.
• Allows a punctual intervention of the sealing and insulation problems.
• Due to the good aeration, the life of the insulation material, sealing, coatings is extended, especially wood.
• Removable and portable system, it can be used under a temporary floor covering.
• Lighting and water management can be done under the system.
• allows you to manage the differences in slope and level.
• Water discharged from the vegetative soil in landscaping areas can be easily removed from the system.
• Planting areas can be easily integrated, while installing drainage, watering, thicknesses and volumes necessary for the proper growth of plants,
• Pools, trails, passages,... can be arranged
• PP Recycled polypropylene and recycled.

Available dimensions

Denomination	Height Minimum Maximum	Composition- A4 + x K-CL
ST-05	18 - 25 mm	-
ST-A0	28 - 36 mm	-
ST-A1	36 - 51 mm	-
ST-A2	52 - 82 mm	-
ST-A3	82 - 135 mm	-
ST-A4	133 - 255 mm	-
ST-A5	260 - 365 mm	1 x K-CL
ST-A6	364 - 507 mm	2 x K-CL
ST-A8	471 - 651 mm	3 x K-CL
ST-A9	576 - 795 mm	4 x K-CL
ST-A10	682 - 939 mm	5 x K-CL
ST-A11	786 - 1083 mm	6 x K-CL

Head Available and Options

• ST-SP : X-brace for 3 and 4 mm paving
• ST-F: Fin spreader, thickness 3 - 5 - 7 - 9 mm
• ST-AX: Head for 40 and 50 mm chevron installation
• ST-AR: Head for chevron installation greater than 50 mm
• ST-AW: Pivot to be placed on the axis for installation on aluminum or composite profile
• ST-KS2: 2 mm EPDM spacer call

Technical details.

Example dimensions ST-A1

• Base diam.: 195 mm
• Axis diam.: 104 mm
• Head Top diam: 147 mm
• Base thickness: 3.5 mm to 5 mm
• Top head thickness: 3 to 5 mm

Test result on stud type ST-A1

Position	Height	Slope	Load (daN) kg
100% 1/1	36 mm	0 %	2540
50% 1/2	36 mm	0 %	1650
25% 1/4	36 mm	0 %	675
100% 1/1	51 mm	5 %	1156
50% 1/2	51 mm	5 %	745
25% 1/4	51 mm	5 %	320

Test result on stud type ST-A7

Position	Height	Slope	Load (daN) kg
100% 1/1	365 mm	0 %	1750
50% 1/2	365 mm	0 %	1400
25% 1/4	365 mm	0 %	875
100% 1/1	507 mm	0 %	1225
50% 1/2	507 mm	0 %	980
25% 1/4	507 mm	0 %	612

1/1: load applied uniformly over the entire bearing surface

1/2: load applied to half of the bearing surface.
1/4: load applied to a quarter of the bearing surface.

1 daN = 1 kg/f = 2.23 lb/f

Calculation of the number of plots per M² - Density

It is in calculation of the average, it is necessary to take care to arrange correctly for the narrow areas and paths which require a higher average of studs.

Dimension of the slabs	Nbr of pc/M²
30 cm x 30 cm	13.80 pc
40 cm x 40 cm	7.8 pc
30 cm x 60 cm	6.70 pc
40 cm x 60 cm	5.20 pc
50 cm x 50 cm	5.00 pc
60 cm x 60 cm	3.50 pc