SikaFloor-200 Level - Levelling compound - 3 to 40 mm - Sika

Sikafloor-200 Level is a polymer-modified, cement-based levelling compound for floors, thickness 3 to 40 mm.

1 Item
€42.60Tax Included
SIK 496772
7612895230870

SikaFloor-200 Level - Levelling compound - 3 to 40 mm - Sika

Cement- based self-leveling leveling mass with very low VOC emissions, for indoor and outdoor application.
Sikafloor-200 Level is a multifunctional leveling compound which is characterized by particularly low shrinkage and high thickness.
Suitable for medium duty.

Features

  • Self-leveling
  • Compatible with underfloor heating
  • Layer thickness up to 60 mm if aggregates are added
  • low voltage
  • Pumpable
  • Suitable for exterior application if covered with a waterproof finish
  • Resistant to office chair castors according to EN 12529
  • Suitable for creating an adhesive screed on cementitious substrates under ceramic tiles

Application areas

Sikafloor-200 Level is suitable for smoothing, equalizing and leveling suitable substrates, before laying parquet, ceramic tiles, seamless floor coverings based on synthetic resin, textile or elastic floor coverings , and this inside and outside residential and non-industrial buildings.

Application

  1. Spread the mixed Sikafloor-200 Level using suitable tools (trowel or notched scraper, or adjustable handle scraper) and eliminate air entrapments with a bubble-release roller.
  2. Perimeter joints and expansion joints must be considered up to the finished surface.
    Avoid the introduction of equalization mass.
  3. The leveling layer must be sufficiently thick and the surface sufficiently flat, as indicated by the manufacturer of the tiles or the floor covering.
  4. In case of thicker layers, avoid contact with vertical structures by placing an insulation strip around the perimeter.
  5. If a second leveling coat is to be applied, the first coat should be primed with Sikafloor-03 Primer or with Sikafloor-01 Primer (1:1).
    The maximum layer thickness cannot be exceeded when applying in two coats.
    The second layer cannot exceed the layer thickness of the first.
  6. Avoid contact with metal, such as water pipes (eg by insulating the penetrations of the latter) because pipes made of galvanized steel in particular are not sufficiently protected against corrosion.
  7. Protect Sikafloor-200 Level leveling layers from high ambient temperatures, direct sunlight and drafts (curing treatment).

Consumption

Approx. 1.8kg/m²/mm

Conditioning

25 kg bag: Grey.

Sika
SIK 496772
1 Item

Data sheet

Signal word
DANGER
Hazard statements
H318 – Causes serious eye damage.
Hazard pictogram
Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
 

Specific References

EAN13
7612895230870
There are no reviews for this product yet.

Customers who bought this product also bought: