Film protecteur mat pour parquets 1 L - n°52 - HG

Matte protective film for parquets 1 L - HG

This protects the varnish of your parquet against "wear, scratches and other damage. This protective film also gives the soil an anti-slip effect. 1 liter of product is enough to treat about 40 m² per layer. This product is also available in brilliant < SPyear >

Applications:

(1) clean the support carefully, so that it is free of grease and dust - also if it is a new parquet floor. Remove any layers of wax, polish and polymers. To find out if your soil must undergo specific treatment: refer to HG treatment advice for floors on the side of the bottle.

< sPan >(2) do not shake before use, but reverse the bottle closed several times to mix the contents without the lather.

(3) for good to distribute the product, preferably use a broom MOP (see the label attached to the neck of the bottle). If necessary, you can also use a lint cloth wrapped on a squeegee.

(4) pour a small amount of pure liquid on the floor and spread it on the ground without pressure on the brush or squeegee and still working in the direction of the wood.

(5) once the dry product (after about 60 minutes), a second coat may be applied in the same direction as the first.

(6) the surface is available one to two hours after the last coat, and the product is completely dry after three days.

Consumption:

40 m² per litre and per layer./ span >