SikaBond-52 Parquet i-Cure - Elastic Parquet Adhesive - Sika

(5/5) out of 1 total ratings

SikaBond-52 Parquet is an elastic, single-component, solvent-free parquet adhesive designed for application with Sikabond Dispenser spreaders or beads.

Packaging:
14 Items
€17.36Tax Included
€17.71- 2%

Volume discounts

QuantityYou SaveUnit price
105 %€16.83
207 %€16.47
6010 %€15.94
SIK 424419
7612894887549

SikaBond-52 Parquet i-Cure - Elastic Parquet Adhesive - Sika

SikaBond-52 Parquet is an elastic, single-component, solvent-free glue for parquet , designed for application with Sikabond Dispenser spreaders or by cords.

Features

  • Glue can be sanded
  • Parquet can be sanded after 12 hours
  • Sound-absorbing elastic glue that dampens footsteps
  • Suitable for bonding parquet directly to existing ceramic tiles
  • Suitable for underfloor heating
  • Very low VOC emissions
  • Reduces tension on the substrate and absorbs longitudinal tension between parquet and substrate

Application areas

  • Designed for full bath bonding using SikaBond Dispenser spreaders:
    Solid and prefabricated parquet, mosaic parquet, industrial parquet, chipboard panels and wood for the substructure.
  • Designed for the Sika AcouBond system and bead bonding:
    Solid or multilayer parquet, chipboard and wood for the substructure.
  • SikaBond-52 Parquet is specially designed for use with difficult woods.

Application

  1. The support must be clean, dry and homogeneous, free of oil, grease, dust and loose parts.
    Paints, laitance and other loose parts must be removed.
  2. Concrete floors and/or cementitious screeds must be sanded and carefully cleaned using an industrial vacuum cleaner.
  3. Anhydrite screeds/floors should be sanded and thoroughly cleaned with an industrial vacuum cleaner shortly before work begins.
  4. Broadcast mastic asphalt floors must be primed prior to the application of Sika Primer MR Fast (see Technical Data Sheet).
  5. Enamelled ceramics and old ceramic tiles must be degreased and cleaned beforehand with Sika Aktivator-205, or the surface of the tiles must be followed by careful cleaning using an industrial vacuum cleaner.
  6. Glue and/or screw the wooden/plaster panels to the substructure so that they are fixed to the support.
    In the case of a floating or detached floor, consult Sika Technical Service.
  7. SikaBond-52 Parquet can be used without primer on cement-based floors, anhydrite floors, chipboard, concrete and ceramic tiles.
  8. Use Sika Primer MR Fast on sprinkled mastic asphalt floors, cement-based floors with too high a residual moisture content, and in the case of renovation on adhesive residues and on weak, non-bearing substrates.

Consumption

Sika AcouBond System:

  • ∼400–500 ml/m2 approx for SikaLayer-03 and ∼500–600 ml/m2 approx for SikaLayer-05.
  • Filling of all cutouts is required.
  • Use a triangular tip with an opening of 8 x 10 mm.

Full bath bonding using SikaBond Dispenser-1800 /-3600 /-5400:

  • For full bath bonding using the SikaBond Dispenser, refer to the document Method of application of the SikaBond Dispenser series

Bonding to the cord:

  • ∼44 ml per running meter = 250-500 g/m², depending on the spacing between the beads (solid parquet, chipboard and multi-layer parquet).

Supports treated with Sika Primer MR Fast generate less consumption of SikaBond-52 Parquet glue.

Conditioning

  • Pocket of 600
  • 1800ml bag
  • 13 kg metal bucket.
Sika
SIK 424419
14 Items

Data sheet

Signal word
As of Q3 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard statements
As of Q3 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard pictogram

Specific References

EAN13
7612894887549
Excellent

Sika a les meilleurs produits

By Adib a. the 02/22/2024

Customers who bought this product also bought: