Renoclear - Lightening bleach for all exterior woods - Owatrol

Renoclear - Lightening bleach for all exterior woods - Owatrol

Bleaches stains intrinsic to wood and lightens traces of bluing , to give a homogeneous appearance without sanding.

Properties :

• Lightens discolorations and/or over-colorations of wood including traces of bluing.
• Restores a homogeneous appearance without sanding or rubbing.
• Eliminates traces due to tannin drippings.
• Effective on all modified woods (Accoya, Bamboo, Thermoheated...).
• Ready to use, do not dilute. Apply on dry wood.
• Clean/neutralize with SOAPCLEAN* and rinse thoroughly.

NB: RENOCLEAR is neither a sober nor a cleaner, nor an oil remover.

Application :

1. On a perfectly dry support, apply RENOCLEAR by brush or roller without overloading.
2. The use of a sprayer (plastic nozzle) is possible (except in the event of wind), insofar as a smoothing is carried out with a brush or a roller in order to make penetrate the product.
3. Depending on the intensity of the stains to be treated, leave to act between 6 and 24 hours.
4. On certain stubborn traces, it may be necessary to carry out a second application.
5. Then apply diluted SOAPCLEAN* (4 capfuls for 10 liters of water) to clean the surface.
6. Scrub with a synthetic deck brush then leave to act for 5 minutes. Rinse with plenty of water.
7. Leave to dry for at least 72 hours (wood humidity ≤ 18%) before applying a finish.
8. To see the final result of RENOCLEAR, the support must be perfectly dry, otherwise traces will persist.

ATTENTION: Read recommendation before/after application in the technical data sheet

Destination :

• Outdoors only.
• All woods including Red Cedar and modified woods.

Conditioning :

5L container.