MN Pierre Bleue Protector - Odorless water-based impregnation - Lithofin

MN Pierre Bleue Protector - Odorless water-based impregnation - Lithofin

Belgian blue stone, also called small granite, is a limestone.

Its dense structure does not allow the use of impregnation to protect it, a technique usually used for natural stones.

Lithofin Maintenance product for blue stone has proven itself for many years in regular maintenance work.

Lithofin MN Protector for Blue Stone effectively completes and optimizes this maintenance.

It is a maintenance product in aqueous solution, which contains additives and special water-repellent and oil-repellent polymers, of great efficiency.

Lithofin MN Protector for Blue Stone is introduced into the pores and capillaries of the surface and immediately forms an invisible film of extreme finesse.

This reduces the absorbency which prevents the penetration of water, oil and grease and the formation of stains. Impurities thus remain on the surface, where they can easily be removed.

Changes in the appearance of the treated surface are minimal or nil. This effect remains, depending on the stress, from several weeks to several months.

Technical specifications :

• Density: approx. 1.0g/cm3
• pH: approx. 4.5
• Appearance: clear, yellowish
• Odor: almost odorless
• Flash point: not applicable

Application domain :

For regular bluestone surface treatment. Effectively protects kitchen worktops, sinks, window sills, tables etc. against stains and makes their maintenance easier. Surfaces can be polished, smooth or rough.

Manual :

1. Shake lightly before use. Surfaces must be completely dry, clean and stain free.
2. Apply with a clean cloth, Lithofin MN Blue Stone Protector undiluted, in a thin and even layer and rub to make it penetrate.
3. During the first application, repeat the operation within 20 minutes.
4. Avoid puddles and the formation of drops or wipe immediately to make them disappear.
5. Do not allow any excess product to dry on the surface, clean or rub completely within approximately 10 minutes.

Yield :

• about 10 m²/litre for raw surfaces, up to 20m²/litre for polished surfaces.