MN Cement Remover - Cement remover for natural stones - Lithofin

(4/5) out of 1 total ratings

This product is an acid cleaner for cleaning granite , gneiss , quartzite and other natural stone and concrete slabs.

It eliminates cement haze , encrusted dirt residues, efflorescences , rust and weathering due to rust.

Packaging:
16 Items
€15.16Tax Included
€15.47- 2%

Volume discounts

QuantityYou SaveUnit price
23 %€15.00
34 %€14.85
55 %€14.69
1010 %€13.92
LIT 162-11-B
4001524016214

MN Cement Remover - Cement remover for natural stones - Lithofin

This very powerful cleaner contains a specific combination of acids and rust removers.

Lithofin MN Cement Remover dissolves and removes cement film, mortar residue, efflorescence, limescale deposits, dirt, rust and rust discolouration.

Eliminates yellowing due to rust from stones containing iron and prevents its recurrence.

Technical specifications :

  • Density: approx. 1.2g/cm3
  • pH: < 1(concentrate)
  • Appearance: transparent, reddish
  • Smell: fresh and pleasant

Application domain :

Removing cement films from new coatings, basic cleaning of old coatings and removing rust and rust discoloration.

Lithofin MN Ciment Remover is particularly suitable for cleaning gneiss (Serizzo, Cresciano, Calanca) and granites (Blanc Sarde etc.) which contain iron.

Manual :

  1. Depending on the type and degree of fouling, apply Lithofin MN Cement Remover pure or diluted in 10 volumes of water and spread with a brush.
  2. After a few minutes, brush and eliminate completely by rinsing with water.
  3. If necessary, repeat the procedure.

Tip: Cases of stubborn discoloration due to rust should be treated with Lithofin BERO . This product is also necessary on very dirty floors cleaned with Lithofin MURO .

Warning: Lithofin MN Enlève Ciment is not suitable for polished and honed surfaces of limestone, marble, concrete, terrazzo. If in doubt, test on an inconspicuous surface. Surfaces and elements sensitive to acids such as anodized surfaces, glazed wood, chrome, marble etc. must be protected from splashes.

Yield :

  • about 30 to 50 m²/L depending on the clogging and the type of soil treated.
Lithofin
LIT 162-11-B
16 Items

Data sheet

Signal word
DANGER
Hazard statements
H290 – May be corrosive to metals.
H314 – Causes severe skin burns and eye damage.
Hazard pictogram
Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
 

Specific References

EAN13
4001524016214
Efficace, très puissant

Efficace et très puissant

By Mathieu B. the 10/12/2019

You might also like

Customers who bought this product also bought: