Omnimat SR - Natte de désolidarisation

Omnicol Omnimat SR

Applications:

Omnimat SR mast using dampens the sounds of contact of the tiled floors (1). Ideal where ceramic tiles or natural stone in buildings can cause some noise for lower local (2). The mast is permeable to heat and so can be used also on media already with a heating floor. Omnimat SR also provides an uncoupling of soils which "work" as the wooden panels, the fresh concrete or the screeds of cement compared, again, to the underfloor heating. The uncoupling prevents cracking of the surface tiled due to cracking of the support up to a width of 2 mm! Given its low thickness of only 4 mm, the mast is applicable nearly everywhere. Omnimat SR only use indoor application, as well as wet dry premises.

Features:

• Dampens noise in the surrounding premises up to 16 dB. n < /li>
• Can also be used for the uncoupling of media who "work".
< li >Low thickness of 4 mm only. 
• Only for domestic, both application in dry premises than wet.

Consumption:

The mast will be implemented without recovery. Often, we can use waste from cutting to make outlying bands. Consumption will be equal to or slightly higher than the floor area increased the surface of the peripheral bands.

< strNGO >Packaging:

150 masts of 700 x 1000 x 4 mm per pallet (105 m2 per pallet) or boxes of 12 poles of 700 x 500 x 4 mm each (4.5 m² per box).