Sika Boom-552 FoamFix - Fast-curing mounting adhesive EC 1 PLUS - Sika

Sika Boom-552 FoamFix - Fast-curing mounting adhesive EC 1 PLUS - Sika

SikaBond FoamFix is a fast-curing, low-expanding polyurethane mounting adhesive that can be applied with a gun , for bonding insulation and plasterboard panels to various substrates.
EC 1 PLUS label: very low VOC emissions.

Features

• Good adhesion to many building materials
• Moisture resistant once cured, single-component, ready to use
• Good thermal insulation
• Can be cut, sanded and painted
• Professional application with a spray gun

Areas of application

The product is designed for use indoors and outdoors, above and below ground level:

• Plasterboard
• Extruded polystyrene (XPS) panels
• Expanded polystyrene (EPS) panels
• Wood fiber panels
• Cork insulation panels
• Non-structural building elements

Application

1. Shake the aerosol can well at least 20 times before use.
   Note: Re-shake after prolonged interruptions during use.
2. Remove the aerosol can cap.
3. Screw the aerosol can onto the threads of the application gun.
4. Dispense the foam by pressing the trigger.
   IMPORTANT: To ensure proper flow, hold the aerosol upside down during dispensing.
   Note: The amount of foam extruded can be adjusted by applying more or less pressure to the trigger or by using the flow adjustment screw on the application gun.
5. Apply lines of foam 2 to 3 cm wide to the panel.
6. Space the lines approximately 25 cm apart.
7. Before attaching the panels to the support, allow the foam to harden for the specified waiting time (2-3 minutes).
8. Secure the panels within the specified open time of the foam (5-8 minutes).
   IMPORTANT: Do not move or reattach the panels once the foam has started to harden.
   If a panel needs to be removed and re-glued, reapply the foam as previously described.
9. Fill the gaps and joints between the panels with foam.
   Note: Small spaces can be filled using an extension tube, however this will reduce the flow of foam.

IMPORTANT: Before removing the aerosol, place all remaining contents of the aerosol in a container for safe disposal.
Removing the aerosol can without emptying it first can cause foam to splash.

IMPORTANT: Clean the application gun with Sika Boom Cleaner immediately after use.
Removing the aerosol can without thoroughly cleaning it with Sika Boom Cleaner can damage the application gun.

Consumption

750 ml aerosol can, 30 mm wide line, ~38 m

Packaging

750 ml aerosol

Formerly SikaBond Foamfix

FAQ - Frequently Asked Questions

1. Can Sika Boom-552 FoamFix be used as a replacement for traditional glue?
   Yes, in most cases. This foam adhesive offers very strong adhesion and is a superior replacement for conventional mounting adhesives for insulating panels, baseboards, door frames, OSB boards, etc.
2. Does the foam expand a lot?
   No, it's a low-expansion foam, which prevents deformation during assembly.
3. Can it be used for assembling doors and windows?
   Yes, it is even recommended for shimming and fixing frames thanks to its quick setting time.
4. Can it be used outdoors?
   Yes, once hardened, it is perfectly resistant to humidity and aging. However, application must be carried out under suitable conditions (temperature > +5°C).
5. Is it compatible with polystyrene?
   Yes, fully compatible with EPS and XPS, unlike some solvent-based glues.
6. What is the approximate consumption?
   One can can replace approximately 25 to 40 kg of traditional glue, depending on the thickness of the bead and the surface area of the panels.
7. Can the foam be painted after it has dried?
   Yes, once hardened, it can be cut, sanded and painted.
8. How much time do I have to position the materials?
   Approximately 5 minutes after application. The effect begins quickly.
9. What is EC1 PLUS certification?
   This is the strictest certification regarding low VOC emissions, guaranteeing a product suitable for indoor work without harming air quality.
10. On which surfaces is adhesion optimal?
    Concrete.
    Brick.
    Rock.
    Drink.
    Metal.
    PVC.
    Insulating panels.
    Plasterboard.