Inspection cover galvanized ribbed EURO

Inspection cover galvanized ribbed EURO

Inspection cover A15 galvanized with ribbed sheet steel.

As part of an application reserved for pedestrians and cyclists.

Use:

Access hatches: the solution of coverage of the pits under the water regulation (article 20.3).

The upper part of the pit must be closed by a lid that must be able to be removed easily for access to the ventilated void, drainage pipes, to the collectors...

Features:

The galvanized trapdoor ridged EURO is available in 7 sizes.

The frame is steel galvanized and equipped with 2 fixation clips to seal the lid into the ground.

The cover consists of a ribbed anti-slip galvanized steel sheet. 

The Euro access doors are supplied with 2 keys of lifting for models SP030, SP040 and SP050.

The Euro access doors are supplied with 4 keys of lifting for models SP060, SP070, SP080 and SP100.

Table of exterior and interior dimensions

Definition of classes of load resistance

	Places only accessible to pedestrians and cyclists. Breaking strength: 15 kN/m² or 1.5 tons/m²
	Sidewalks, pedestrian areas, private parking and floors for car parking areas. V max: 20 km/h Breaking load: 125 kN/m² or 12.5 tons/m²
	Pedestrian streets and car parks. Places for cars and vans at moderate speed. Breaking load: 250 kN/m² or 25 ton/m²
	Lanes of traffic and areas of parking areas for all types of road vehicles. V max: 50 km/h Breaking load: 400 kN/m² or 40 tons/m²
	Areas subject to high as the ports and industrial zones to the axle loads. V max > 50 km/h Breaking load: 60 tons/m² or 600 kN/m²
	Areas subject to particularly high loads to the axle as the runways for planes or industrial zones to intensive passage. Breaking load: 900 kN/m² or 90 tons/m²