ElixGround - Two-component epoxy floor paint all traffic - Owatrol Pro

Water-based epoxy floor paint is a "high resistance" chemical and mechanical protection.

Color:
€452.82Tax Included
OWA ELSOLORESIST10B+PB
3285820059910

ElixGround - Two-component epoxy floor paint all traffic - Owatrol Pro

Water-based epoxy paint for floors.

" High resistance " chemical and mechanical protection.
Extremely durable thanks to its bi-component formulation.

Properties :

  • Easy to apply, designed for industrial concrete floors subjected to strong stresses which it embellishes, decorates and protects. Excellent hiding power.
  • ElixGround offers high resistance to:
    • Mild conventional acids and bases as well as harsh chemical cleaners
    • Oils, Solvents, and Hydrocarbons
    • Even permanent wetlands
    • Chemical and mechanical attacks (resistance to abrasion and wear)
    • Heavy and intense traffic: handling equipment, lifting equipment, cars, etc.
  • Prevents the formation of dust on concrete slabs and screeds.
  • Easy to mix (component A + component B).
  • Easy to clean smooth finish.
  • Can be applied over existing paints
  • The yield can vary according to several parameters: the state and the porosity of the support, the temperature and the relative hygrometry.

Recommendation before application:

As a reminder, in order to avoid any rising damp, a geotextile membrane must have been provided under the concrete slab during construction of the structure.

Application :

  1. Mix component A with component B of ElixGround using a mixer adaptable to a drill (or helical) without bringing in too much air, at low speed.
  2. Wait 5 min before applying. ElixGround must imperatively be applied within one hour of mixing the 2 components A and B. After this time, there will be a significant loss of adhesion and abrasion resistance properties. Never add water.
  3. Apply a very thin first coat, so drawn using a short-haired roller.
  4. Deposit approximately 200 µm.
  5. Leave to dry between 6 to 12 hours.
  6. Apply the second thicker coat. Apply between 200 and 300 µm, with a short-haired roller.

Destination :

  • Interior.
  • Factories with intense traffic, circulation aisles, floors of workshops, warehouses, showrooms, playrooms, tiling, garages...

Conditioning :

10L bucket (7.1L + 2.9L).

Owatrol
OWA ELSOLORESIST10B+PB

Data sheet

Signal word
DANGER
WARNING
Hazard statements
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H318 – Causes serious eye damage.
H319 – Causes serious eye irritation.
H411 – Toxic to aquatic life with long lasting effects.
Hazard pictogram
Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
Hazard pictogram : GHS09 - Environmental hazard GHS09 - Environmental hazard
 

Specific References

EAN13
3285820059910
There are no reviews for this product yet.