TECHNIGUARD FLOOR

Protection hydro-repellent soils for porous media

Description:

• TECHNIGUARD FLOOR is liquid, ready to use and intended for repellent, water-repellent porous soil treatments; Calcareous stone, stone quarries, granite, sandstone, slates, stones restored, terracotta, architectural concrete, prefabricated slabs, pavers self-locking,...
• TECHNIGUARD FLOOR, suitable for indoor and outdoor soil treatment;
• TECHNIGUARD FLOOR does not alter the appearance of the support, it does not form a film, and he let breathe the material;
• TECHNIGUARD FLOOR is a hydro-repellent surface, phase aqueous, colourless, composed of silanes and oligomers chains to fluoride radicals.

Performance:
TECHNIGUARD FLOOR was tested by the Science Center and the Construction Technique:

• September 28, 2005; report C.S.T.C 623 X 188
  Reports of trials on the application of external stains on concrete slab, before and after treatments.

Applications - Treated material properties:

• Anti-grease protection, anti-oil;
• Waterproof protection and repellent soils
• High protection against pollution, anti-dirt;
• Dust protection;
• Protection from the weather, atmospheric agents, pollutants and acid rain;
• Reduced due to frost damage;
• Limit theformation of efflorescence by water moving;
• The reduction of water absorption allows the material to keep its thermal insulation properties;
• Easier maintenance of the support by the character self-cleaning of the anti-graffiti;
• Facilitates the removal of the gum;

Properties:

• Reversible system, no film;
• Does not change the appearance of the support;
• Breathable material - permeable to water vapour;
• Free solvent, odourless, non-toxic and nonflammable.
• Excellent aging, no yellowing;
• Can be applied on media wet and cool joints (3 to 4 days);
• Sustainable treatment at the time;
• Reduces the formation of microorganism (mosses, lichens,...).

Implementation and precautions:
Implementation:

• The media must be healthy, clean, dusted and defatted;
• Disinfect the support, eliminate the mosses, algae and lichens with the help of a fungicide type TECHNICIDE + (B 1904 approval number);
• Application to saturation, by brush, roller or spray (TECHNISPRAY 10) one to two successive layers (the second layer is sprayed onto the first layer still wet);
• Consumption: between 200 and 1000 ml/m² totalAccording to the porosity of the media;
• Determination of consumption and the effectiveness of the treatment by the method of the glass pipe;
• Support dealt with TECHNIGUARD FLOOR can be exposed to rain after +/-2 hours.

Notes and precautions:

• It is recommended after applying the various layers and before drying of the product, to remove the excess on the surface with a cloth or roll slightly moistened with water.
• The temperature of the medium can never be lower than 5 ° C;

Technical features:

• Density at 25 ° C: 1
• Appearance: Colourless liquid neon;
• Active ingredients: 5%
• Flash point: (not);
• Viscosity: 100 cPs;
• PH: 7 (neutral);
• Change of surface tension: from 20 to 40 mN/m + oleophobic - anti-oil;
• Angle of wetting: virtually nil;
• Water vapour permeability: coefficient µ INF. 10;
• Impermeability to water according to Test method of glass Pipe: 100%;
• Maximum efficiency: after 7 days.
• Principle of action: hydrophobic & oleophobic
• Preliminary test in-situ always advised;

Packaging and storage:
Keep frost-free - Stockable 1 year