Minéralisant Guard H - Surface hardener and water repellent - Guard Industrie

(3/5) out of 1 total ratings

Minéralisant Guard H is a product for mineralising new or old porous friable materials damaged by water infiltration, damp, frost, etc.

Packaging:
3 Items
€100.31Tax Included
€102.36- 2%

Volume discounts

QuantityYou SaveUnit price
35 %€97.24
510 %€92.12
1015 %€87.01
GUA 72030005000
3461509502742

Minéralisant Guard H - Surface hardener and water repellent - Guard Industrie

Mineralizing Guard H is a product for mineralizing new or old porous friable materials damaged by water infiltration , humidity , frost , etc.
It penetrates friable materials to crystallize, harden and mineralize.

Mineralizing Guard H has excellent water-repellent properties which make it possible to lastingly limit the harmful effects due to humidity : infiltration, acid rain, erosion, freeze/thaw cycle, formation of moss and lichens, rise of efflorescence, formation of saltpetre…

Advantages

  • Fixes and consolidates porous friable materials: “anti-dust” effect.
  • Protects against water, humidity, frost and limits efflorescence and the development of moss and lichens.
  • Effective for more than 10 years.
  • Colorless.
  • Does not form a film, lets the support breathe.
  • Product in aqueous phase, solvent-free and non-flammable.
  • Perfectly UV resistant.
  • Does not yellow over time.

Use

  • Dry or wet porous materials: cement mortar or plaster, concrete, natural stone, brick, coating, etc.
  • Facades and floors
  • New or old
  • Inside and outside

Implementation

Preparation of the support

  1. Apply the product to a clean surface.
    Depending on the friability of the support, carry out chemical or mechanical cleaning (using a brush).
  2. Rinse thoroughly until the surface is free of all traces of cleaner and allow to dry 24/48 hours before treatment.

Application

  1. Use the product pure, do not dilute.
  2. Shake the packaging well before use and carry out a preliminary test to check the good penetration of the product and the appearance after drying.
  3. The support must be impregnated until saturation in one coat or in two coats “wet on wet” depending on the porosity.
  4. Do not overload the support, remove any excess before drying. Risk of white marks.
  5. Optimal effectiveness obtained after 2 to 7 days of drying.
  6. The treated support cannot be covered with another coating.

Application tools

Apply with a low pressure sprayer, roller or brush.

Consumption

3 to 6 m² per liter.

Conditioning

5 L.

Guard Industrie
GUA 72030005000
3 Items

Data sheet

Signal word
DANGER
Hazard statements
H315 – Causes skin irritation.
H318 – Causes serious eye damage.
Hazard pictogram
Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
 

Specific References

EAN13
3461509502742
Il fait froid

Je crois que je ne dois pas utiliser ce produit pendant qu'il fait beaucoup moins de zero degrees centigrade.

By David K. the 01/08/2021

Customers who bought this product also bought: