IMPERGUARD SF, water repellent for facades - Guard Industrie

Imperguard SF, water repellent for facades Guard Industrie
-waterproofs and protects against moisture
-dust
-resistant to UV and frost

Currently out of catalog
Packaging:
€0.00Tax Included
GUA 20700005000
3461509502704

IMPERGUARD SF SPECIAL FACADES - GUARD INDUSTRY

ImperGuard SF is a repellent high-performance for the protection of the walls and porous facades against moisture.
ImperGuard SF penetrates deep pores of materials to make them waterproof and restricting the harmful effects due to moisture: infiltration, acid rain, erosion, cycle freeze/thaw, formation of mosses and lichens, appearance of blooms or saltpetre... The water-repellent properties of ImperGuard SF are acquired very quickly (a few hours to 3 days). ImperGuard SF also has properties ofdust. It allows to harden on the surface materials to make them less fragile and less dusty surface. ImperGuard SF is a non-film forming impregnation product, support remains permeable to air and water vapour. Totally colourless After application, it changes neither the appearance nor the nature of the treated material. In addition, it perfectly UV-resistant and non-yellowing in time. Product in aqueous, solvent-free oil and biodegradable to 90%.

  • Waterproofsand protects against moisture
  • Strong penetrating power and rapid efficiency
  • Effect dust
  • Does form a film, breathable support
  • Odourless and invisible
  • Is resistant to UV and frost

Use

ImperGuard SF is used in outside and Interior on vertical surfaces concrete, natural stone and limestone, coating, brick... ImperGuard SF is used in new work as in renovation.

Preparing media

  • Apply the product on a clean, dust, dry surface.
  • To remove the traces of pollution and oily stains use Decap' façades Guard ecological. To remove the traces of ROEs or the sails of cement use Decap' ROEs Guard ecological.

Enforcement tools

Use a brush, a roller or sprayerlow pressure.

Application

  • Use the product in its pure form: do not dilute.
  • Well shake the packaging before use and prior testing.
  • Support must be soaked to saturation in a layer or two layers "wet on wet" depending on the porosity.
  • Always apply from bottom to top.
  • Do not overload the bracket, remove any excess before drying.
  • Protected drying: 24 hours.
  • Maximum efficiency obtained after 2 to 3 days.
  • Cleaning of equipment in water immediately after use.

Consumption

According to the porosity of the material, use 1 L of ImperGuard SF is equivalent to the treatment of a surface between 3 and 6 m².

Guard Industrie
GUA 20700005000

Specific References

EAN13
3461509502704
There are no reviews for this product yet.

Customers who bought this product also bought: