ProtectGuard CE Special Concrete - Water and oil repellent for concrete - Guard Industrie

ProtectGuard CE Special Concrete - Water and oil repellent for concrete - Guard Industrie

ProtectGuard CE is the reference product for the water-repellent , oil-repellent, anti-stain and anti-graffiti protection of all porous concrete used in buildings.
It provides lasting protection for all porous materials and helps prevent the main causes of damage such as atmospheric pollution, greasy dirt , infiltration , chlorides, corrosion, graffiti , etc.

ProtectGuard CE is a non-film- forming impregnation product, the support thus remains permeable to air and water vapor.
Completely colorless after application, it modifies neither the appearance nor the nature of the treated support.

Advantages

• Protects from water, dirt and fatty liquids.
• Protects against chlorides, carbonation and corrosion.
• Permanent anti-graffiti property.
• Effective for 10 years.
• Limits the formation of efflorescence.
• Strong penetration power and beading effect.
• Limits the formation of moss and lichens and clogging due to pollution.
• Makes cleaning easier.
• Prevents damage due to freezing/thawing.
• Non-film-forming, lets the support breathe.
• UV resistant, does not yellow.
• Ready to use.

Use

• All types of concrete: common, reinforced, fiber-reinforced, high performance (BFUHP, GRC)
• Facades, walls and floors
• New or old
• Exterior and interior

Implementation

Preparation of the support

1. Apply the product to a clean, dust-free, degreased and dry surface.
2. Rinse thoroughly until the surface is free of all traces of cleaner. Wait until the surface is completely dry before applying ProtectGuard CE Special Concrete.

Application

1. Use the product in its pure state: do not dilute.
2. Shake the packaging well before use and carry out a preliminary test.
3. Apply the product to saturation in one coat or in two coats “wet on wet”.
4. Do not overload the support.
5. The surface must be protected for 24 hours (rain, grease, etc.).
6. Optimal effectiveness of the product obtained after 7 days.

Application tools

Apply using a low-pressure Viton joint sprayer, airless sprayer, roller or brush.

Consumption

90 to 170 g/m².

Conditioning

5 L and 25 L can.