ProtectGuard - Water and oil repellent - Guard Industrie

(5/5) out of 2 total ratings

ProtectGuard has established itself as the benchmark product for preventing the deterioration of porous materials (concrete, cement, natural or synthetic stone, etc.).

Packaging:
4 Items
€122.25Tax Included
€124.74- 2%

Volume discounts

QuantityYou SaveUnit price
35 %€118.50
510 %€112.27
1015 %€106.03
GUA 21000005000
3461509000057

ProtectGuard - Water and oil repellent - Guard Industrie

ProtectGuard has established itself as the reference product for preventing the degradation of porous materials (concrete, cement, natural or synthetic stone, etc.).
The water-repellent properties of ProtectGuard allow it to prevent the penetration of water and, therefore, eliminate the harmful effects of humidity : water infiltration, frost, saltpeter, moss, etc.

The oil-repellent and stain-resistant properties of ProtectGuard block the penetration of greasy stains, air pollution and prevent the penetration of ink and paint pigments (graffiti).
ProtectGuard is a solvent-free, low VOC, water-based product.

Advantages

  • Protection against water, oil, stains and graffiti
  • Does not form a film, lets the support breathe
  • Odorless and invisible: does not change color
  • UV and frost resistant
  • Delays aging and facilitates maintenance
  • Can also be used indoors on walls, fireplaces, decorative coverings, etc.

Use

  • Porous materials: natural or reconstituted stone, concrete, terracotta, coating, mortar, etc.
  • Floors and facades
  • New or old
  • Inside and outside
  • Recommended for terraces, driveways, pool decks, walls, gables, tile joints, etc.

Implemented

Preparation :

  1. Apply the product to a clean, dust-free, degreased and dry surface.
  2. Rinse thoroughly until the surface is free of all traces of the cleaner.

Application :

  1. Use the product in its pure state, do not dilute.
  2. Shake the packaging well before use and carry out a preliminary test.
  3. The support must be impregnated to saturation in a single coat or in two coats “wet on wet”.
  4. Do not overload the support, remove any excess before drying.
  5. On vertical supports, apply from bottom to top.
  6. Protected drying: 24 hours.
  7. Optimal effectiveness obtained after 7 days.

Application tools

Apply with a low pressure sprayer, roller or brush.

Conditioning

1 L, 5 L and 25 L.

Change of name, formerly: ProtectGuard Pro - Water and oil repellent - Guard Industrie.

Guard Industrie
GUA 21000005000
4 Items

Data sheet

Signal word
As of Q3 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard statements
As of Q3 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard pictogram

Specific References

EAN13
3461509000057
protectguard pro

super produit.

By Dominique S. the 07/01/2020
conforme aux attentes et aux délais

bonne réception et produit conforme à description et commande

By Bernard b. the 07/09/2018

You might also like

Customers who bought this product also bought: