PLATINUM P+ liquid - Epoxyacrylate adhesive - Akemi

PLATINUM P+ liquid - Epoxyacrylate adhesive - Akemi

Clear transparent glue (very light color), based on epoxy-acrylate , high adhesion strength, very fast surface drying and processing ability, food approved (approved by an external German research center).

Features :

• Wide range of applications due to the different consistencies
• Very light, transparent color
• Fast hardening (15-40 minutes)
• Very fast surface drying
• Very good polishing capacity
• Enhanced protection against yellowing
• Improved adhesion and adhesive strength, also on ceramic technology
• Excellent adhesion to natural stone, even at high temperatures (60-70°C, up to 100-110°C in case of low load)
• Resistant to water, gasoline, and mineral oils
• When used correctly, the hardened product is classified as harmless to health for bonding natural and artificial stone as well as ceramics in contact with food.

Areas of use:

Very well suited for bonding and cementing natural and artificial stones (marble, granite, concrete cut stone, Terrazzo, composites) horizontally.
Also for bonding stone slabs containing fiberglass (sandwich bonding) and for manufacturing artificial products with stone powder and sand.

Use :

1. The surface to be treated must be clean, completely dry and roughened.
2. The glue can be colored with AKEMI dyes or concentrates for polyester up to 5% as well as with AKEMI Spectrum Pastes; PLATINUM P+ clear Thick L can be diluted with PLATINUM P+ liquid in each proportion of the mixture.
3. Add 1-3 g of white hardener to 100 g of glue (1 g corresponds to approximately 4-5 cm from the tube).
4. Mix the two components thoroughly; the mixture is then ready for use for 5-15 minutes (at 20°C).
5. After 15-40 minutes the treated parts can be worked (e.g. sanded, milled, drilled).
6. Heat accelerates hardening and cold slows it down.
7. Work equipment can be cleaned with AKEMI NitroDiluter.

Packaging:

• 900 ml

FAQ - Frequently Asked Questions

1. What is the purpose of PLATINUM P+ Liquid?
   It is used for bonding and repairing natural and composite stones, particularly when a fluid adhesive is needed that can penetrate fine cracks.
2. Can it be used outdoors?
   Yes, its very good resistance to UV and weather conditions allows for outdoor use.
3. Is it suitable for structural bonding?
   Yes, it offers excellent mechanical resistance suitable for strong and durable bonding.
4. What is the difference between the liquid and paste versions?
   Liquid, ideal for fine cracks and very precise bonding. Paste, better suited for vertical bonding or larger gaps.
5. Does the product yellow over time?
   Its formulation offers good UV stability. However, like any adhesive, a slight change in color may occur depending on exposure and the substrate material.
6. What is the drying time?
   The working and hardening time depends on the ambient temperature. At standard temperature (≈20°C), setting is rapid. The warmer it is, the faster the reaction.
7. Can it be sanded and polished?
   Yes, once fully hardened, it can be sanded and polished like stone.