Marmorkitt 1000 Thixo Structure Stone - Creamy Adhesive - Akemi

Marmorkitt 1000 Thixo Structure Stone - Creamy Adhesive - Akemi

Creamy , flexible glue with special pigments to recreate the structure of stone , resistant and colorable.
For bonding and sealing natural stones , recommended for vertical surfaces.

For filling large holes.
Excellent for restoration work.

Features :

• Good applicability thanks to its creamy and flexible consistency, recommended for vertical surfaces
• Good and rapid drying of surfaces - fast hardening (15-30 minutes)
• Good workability (sanding, boring, milling)
• Very good polishing capacity
• Excellent adhesion to natural stone, even at high temperatures (70-80°C, up to 100-110°C in case of low load)
• Resistant to water, gasoline, and mineral oils

Use :

1. The surface to be treated must be clean, completely dry and roughened.
2. The glue can be colored with AKEMI dyes for polyester up to 5%; dilution is possible in all proportions with Marmorkitt Transparent extra liquid.
3. Add 1-4 g of white hardener to 100 g of glue (1 g corresponds to approximately 4-5 cm from the tube).
4. Mix the two components thoroughly; the mixture is then ready for use for 3-10 minutes (at 20°C).
5. After 10-20 minutes the treated parts can be worked (e.g. sanded, milled, drilled) or transported.
6. Heat accelerates hardening and cold slows it down.
7. Work equipment can be cleaned with AKEMI Nitro-Diluent.

Packaging:

• 1 L
• Colour: Light Travertine, Light Brown Jura and Dark Grey Impala.

FAQ - Frequently Asked Questions

1. Is this glue suitable for vertical gluing?
   Yes, its creamy thixotropic texture prevents runoff, making it perfectly suited for vertical surfaces.
2. Can it be used outdoors?
   Yes, for outdoor applications, provided that the appropriate implementation and protection conditions are met.
3. Is it compatible with granite?
   Yes, it adheres very well to granite, marble, natural stone and similar materials.
4. Can it be sanded after it has dried?
   Yes, once hardened, the glue can be sanded, milled and polished.
5. How long does it take to dry?
   The working time is approximately 4 to 8 minutes. Complete hardening occurs quickly (varies depending on temperature).
6. Can the glue be colored?
   Yes, it is possible to add compatible colouring pastes to adapt the shade to the stone.