PolTech Cleaner G - Degreaser for mineral & organic soiling - Pollet

PolTech Cleaner G - Degreaser for mineral & organic soiling - Pollet

Degreasing cleaner for cleaning floors and washable surfaces in industrial environments. Removes mineral soiling (engine oil, synthetic and natural oils) and organic soiling (fatty acids, triglycerides, butter, margarine, chocolate, etc.).

Properties :

• Powerful degreaser for all surfaces.
• Removes mineral (engine oil, synthetic and natural oils) and organic (fatty acids, triglycerides, butter, margarine, chocolate, …) soiling.
• Mechanized or manual implementation.
• Non-allergenic.
• Without binding OELs (Occupational Exposure Limit Values - EU, BE, FR).

Applications:

Degreasing cleaner for cleaning floors and washable surfaces in industrial environments. Removes mineral soiling (motor oil, synthetic and natural oils) and organic soiling (fatty acids, triglycerides, butter, margarine, chocolate, etc.). Product approved for food contact.

Instructions for use:

1. Soaking and impregnation of surfaces with the solution at the dosage recommended below with mechanical cleaning action (auto-scrubber - low and high pressure systems).
2. Regular maintenance: 1.25% (100ml/8L).
3. Daily degreasing: 2% (160ml /8L).
4. Occasional restoration: 3% (250ml/8L).

Packaging:

• 10 Liters / 200 Liters
• 1000 Liters (10 to 15 days for IBC deliveries)

FAQ - Frequently Asked Questions

1. Does the product damage natural stone?
   PolTech Cleaner G can be used on hard stones (sandstone, granite, etc.). Avoid soft limestone (marble, travertine) as its formula can dull them.
2. Can it be used indoors?
   Yes, but ensure good ventilation and thorough rinsing. Ideal for warehouses, garages, workshops, and professional kitchens.
3. Is the product effective against cement laitance?
   Yes, that's one of its main uses. Removing mineral deposits, cement residue, and mortar stains.
4. Can it be used before applying a treatment (waterproofing, protection)?
   Yes, it perfectly prepares surfaces by removing grease and mineral residues.
5. Can it be applied to a high-pressure cleaner?
   Yes, it can be injected at low pressure or applied before passing through the high-pressure cleaner.
6. Is the product dangerous for the seals?
   Not if diluted and rinsed properly. When used undiluted, rinse quickly to avoid excessive drying of the cement joints.
7. Is PolTech Cleaner G compatible with automatic floor scrubbers?
   Yes, it can be used in the tank at low concentration (1 to 3%).
8. Should it be neutralized after rinsing?
   Not necessary for standard use. For specific treatment afterwards, rinse thoroughly.