Flowjoint - Pointing mortar - PTB Compaktuna

Flowjoint is a pointing mortar with high mechanical strength that can also be applied to surfaces that are not permanently damp.

Packaging:
5 Items
€20.24Tax Included

Volume discounts

QuantityYou SaveUnit price
105 %€19.22
248 %€18.62
4813 %€17.60
PTB 67.B
5411574670257

Flowjoint - Pointing mortar - PTB Compaktuna

Flowjoint is a dry powder to which simply adds water to obtain a fast-hardening, low-shrinkage grouting mortar with remarkable self-leveling behavior, which is used to joint paving stones , non-porous clinkers , stone blue , concrete slabs and paving where premature loading and commissioning is desired.

Features :

  • Excellent grip on paving stones and exceptionally high compressive strength.
  • Special hydraulic hardeners, quartz sands and high quality additives.
  • Joints from 8 to 30 mm.
  • Grouting mortar with high mechanical resistance; which can also be applied to surfaces that are not permanently wet.
  • Repairs to existing joints.
  • Classified as CG 2 W A.

Manual :

Support:

  1. The application will always be done on a clean, stable and sufficiently old medium.
    The surface must be free of oil, grease, dust, etc.
    Any loose parts must be removed.
  2. In the case of repairs to paving or old joints, the existing joints and any moss that may be present must be adequately removed.
  3. Moisten the surface beforehand with pure water, remove excess water.
    Avoid the formation of puddles.
  4. Ensure appropriate slope of the paving.
    Pavers, clinkers, concrete slabs, etc. must be well fixed.

Application :

  1. FLOWJOINT is prepared as a paste with ±13% to 14% water, i.e. with ±3.25 L to 3.5 L of water per 25 kg bag depending on the desired consistency.
    Per 25 kg bag, pour the necessary quantity of water into a tank and add the dry pointing mortar slowly and evenly.
  2. Mix everything intensively with a mixer rotating slowly for 5 minutes until you obtain a lump-free, homogeneous and liquid grouting mortar.
  3. Before applying the FLOWJOINT, the mortar is allowed to sit for 1 minute.
    After mixing the FLOWJOINT with water, you have up to 20 minutes to apply the product.
  4. Pour FLOWJOINT over the joints until they are completely filled.
    In places where the product can flow, a small barrier must first be constructed.
  5. You can simply pour the mortar onto the joints with a bucket, a watering can or with a rubber squeegee.
  6. We prevent excess mortar from hardening on the paving by keeping the surface wet.
    As soon as the mortar in the joints begins to harden (at +20 °C, this is the case after ±30 minutes), you must rinse the surface thoroughly with pure water while you remove the excess product with a brush, rubber squeegee.
  7. Remove excess water.
    Avoid hollow joints that are too deep.
  8. Clean the tools with water.

Consumption :

7 to 30 kg/m², depending on the depth of the joints and the dimensions of the paving stones

Usage time:

±15 to 20 mins.

Mix ratios:

±3.25 L to 3.50 L of water per 25 kg bag (±13 to 14%)

Conditioning :

25kg: Light gray.

P.T.B.-Compaktuna
PTB 67.B
5 Items

Specific References

EAN13
5411574670257
There are no reviews for this product yet.

Customers who bought this product also bought: