Wall-Tight - Waterproof protection for interior and exterior walls - Aquaplan

Wall-Tight - Waterproof protection for interior and exterior walls - Aquaplan

Colorless screen, water-repellent and breathable , for the protection of unpainted interior and exterior walls against driving rain and dirt.

MUR-ETANCHE penetrates deeply into all porous substrates and forms a durable, vapor-permeable water-repellent screen, which prevents water from penetrating and helps prevent damage caused by frost and the formation of foam.

MUR-ETANCHE does not contain harmful organic solvents and can therefore also be used indoors.

Benefits :

• Colorless and vapor permeable
• Does not change the appearance of the walls
• Protects against driving rain and dirt
• Environmentally friendly and safe to use
• Easy to apply

Application :

For use on unpainted porous vertical interior and exterior walls as well as on facades made of concrete, brick, plaster and sand-lime brick.

Useful information:

• Store in a cool place (max. 20°C) and protected from frost.
• Do not apply on a painted or cemented wall.
• Do not use MUR-ETANCHE in direct sunlight or if there is a threat of rain within 4 hours.
• During the implementation and the drying, the temperature of the support and the ambient temperature must be 5°C min. and 25°C max.
• Protect nearby painted surfaces, sills, panes, glass, frames, cut stone (blue stone), etc. … against splashes. If necessary, remove these immediately with water.
• MUR-ETANCHE is suitable for almost all common facing bricks. However, more and more pigments are added to the facing bricks. Therefore, always carry out a preliminary test in an inconspicuous place to determine if the appearance of the bricks does not change in an undesirable way.
• Clean tools with water immediately after use.

Prepare the substrate:

1. Dust the support. If the support is very dirty, clean it with a high-pressure cleaner.
2. Remove any paint residues and salt crystals using a stiff brush.
3. Combat green deposits, lichens and algae with the product STOP DEPOTS VERTS or SELF-CLEANING-BIO.
4. Seal cracks larger than 0.2 mm using a suitable colored mortar or putty. Repair joints in poor condition.
5. The substrate must be relatively dry.

Conditioning :

• 0.75l, 5l and 12.5l
• Transparent