Isoline G10 - Drainage membrane with geotextile - MatGeco
(3/5) out of 1 total ratings
Cellular drainage membrane in PE-HD covered with a non-woven geotextile of ±136 g/m² for the protection of building bases , drainage under paving and paving , underground constructions, civil engineering works, garden roofs , etc
Quantity and price expressed in m². Please indicate the quantity in m² .
MAT ILG10
9145342707840
Isoline G10 - Drainage membrane with geotextile - MatGeco
Isoline G10 is a PE-HD alveolar drainage membrane covered with a non-woven geotextile of ±136 g/m².
This geocomposite can be used both vertically and horizontally in applications such as the protection of building bases , drainage under paving and paving , underground constructions, civil engineering works , garden roofs , etc.
Horizontal drainage under paving, paving, garden roofs:
Unroll the drainage membrane with the non-woven geotextile facing up. Carry out a covering using the 10 cm overhanging geotextile provided for this purpose. Place the stabilized sand or the substrate on the nonwoven.
Horizontal drainage on existing concrete slab:
When the hydrostatic pressures under an existing concrete slab cause water to appear on it, it may be interesting to build a new slab on it.
Place the G10 insulation between the two slabs to allow water to circulate under the new floor. In this configuration, orient the face with the knobs and the geotextile downwards, the smooth side upwards.
Vertical drainage of buried walls:
Isoline G10 can also be used to reduce hydrostatic pressure along a buried wall.
Then unroll the membrane with the smooth side towards the waterproofing, geotextile towards the ground. Fix the G10 insulation slightly higher than the part to be backfilled and join the draining pipe in the lower part. The strips will be laid respecting an overlap of ±10 cm using the overflowing geotextile provided for this purpose. Care should be taken to compact the backfill well. After a few weeks, cut the surplus in the upper part and fix the Z profile.
Advantages :
- Very high draining power
- Multi-directional drainage
- Good mechanical protection
- Very high resistance
- Lightweight, easy to cut and apply
- Economic
Applications:
- Under paving
- Under paving
- Green roofs
- Buried walls
- Foundations
- ...
Features :
- Roll format: 2 mx 12.50 m
- Geotextile width: 2.10 m
- Thickness: ±10mm
- Weight: ±740gsm
- Non-woven: one side (136 g/m²
- Material: PE-HD (membrane) + PP (geotextile
- Color: black
- Crushing strength: 42 t/m²
- Drainage capacity:
- 1.26 l/(ms) (i = 0.1 - 50 kPa)
- 4.23 l/(ms) (i = 1 - 50 kPa)
MAT ILG10
105 Items
Data sheet
- Signal word
- As of Q1 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
- Hazard statements
- As of Q1 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
- Hazard pictogram
Specific References
- EAN13
- 9145342707840
Dommage....
Ce produit semble devoir répondre aux attentes, à voir quand sera venu le moment de le poser. Toutefois : Dommage cette bande de 8 cm sur toute la longueur, sans alvéoles. Autant de surface efficace perdue ! Dommage la longueur de coupe semble-t-il inférieure aux 12,5m commandés
By Mareine-Rebillard A. the 09/02/2020
Customers who bought this product also bought:
Cellular drainage membrane in PE-HD covered with a non-woven geotextile of ±136 g/m² for the protection of building bases , drainage under paving and paving , underground constructions, civil engineering works, garden roofs , etc
Quantity and price expressed in m². Please indicate the quantity in m² .