Protect-Dalle - Anti-stain, anti-grease and water-repellent - Aquaplan

Protect-Dalle - Anti-stain, anti-grease and water-repellent - Aquaplan

Transparent breathable surface protection for all absorbent and porous substrates in and around the house such as clinkers and concrete slabs .
Forms an anti-stain , anti-grease and water-repellent protection.

Revives the intensity of the original colors and nuances of the support and slows down the encrustation of dust, grease and oil. Thanks to its water-repellent properties, it slows down the formation of moss and algae and prevents frost damage.
Maintenance is greatly simplified.

Benefits :

• Intensively revives the original colors and shades of the support
• Anti-stain, slows the incrustation of dust and grease and oil stains
• Water repellent, slows the formation of moss and algae and improves frost resistance
• Anti-dust, effective against pollution
• Easy to apply

Application :

Can be used on all horizontal and vertical surfaces such as terraces, paths, paths, facades, tombstones, statues, fireplaces… in absorbent and porous materials, such as klinkers and concrete slabs.

Useful information:

• Store in a cool place (max. 20°C) and protected from frost.
• Do not apply when the ambient and surface temperature is below 10°C and above 35°C and when there is a risk of rain, fog or frost within 8 hours.
• Clean the equipment with water immediately after completion of the work.

Manual :

1. Dust and degrease the support first.
   Clean the support under high pressure in the event of heavy contamination.
   Remove any grease stains.
2. Fight against green deposits, lichens and algae with Stop Depots Verts .
3. Repair any damaged gaskets first.
4. Shake Protect-Dalle intensely before use.
   Test it in an inconspicuous place first.
   Can also be applied on a slightly damp support.
5. Apply Protect-Dalle undiluted to porous materials in a single coat, using a brush, roller or watering can, until the substrate is saturated.
   Avoid the formation of puddles.
   The consumption always depends on the porosity of the support.
   You need about 1 L per 1 to 4 m² depending on the porosity of the support.
6. Let the product dry for at least 4 hours and keep it out of the rain for 8 hours.
7. After 7 days, the diaper provides optimal protection.

Conditioning :

5L and 12L.