Door sill and window sill - Stonecutter - Belgian Bluestone - CUSTOMIZED

Door sill and window sill - Stonecutter - Belgian Bluestone - CUSTOMIZED

Original first choice Soignies Belgian Bluestone

DEBASED and STONECUTTER finishing:

• Thickness of 3 to 20 cm
• Debased or slope
• Upstand with a width of 2 cm, height of 1 or 2 cm (glued or cut in the mass)
• Side stooling for a 5 cm width, ear,...
• Water-sanded top
• Front side finishing : Water-sanded (or chiseled) + cuted chamfer (or rounded chamfer)
• Lateral sides finishing (on 5 cm) :water-sanded (or chiseled) + chamfer
• Drip channel

Other formats and finishes available upon request.

Measurement tips:

In general, window support arises at 2 cm under the window and goes beyond 5 cm from the wall (the drip channel is 2 cm under the stone).

Door is beyond 5 cm from the wall.

In case of built-in, door sill and window sill are embedded on 5 cm on both sides in the wall (either 10 cm longer than the outside width of the bay).

In case of double selection of a upstand and a stooling : it is best to choose same versions (glued or cut in the mass) for both the two elements.

Time limits:

3-6 weeks

To diminish delays, it is best to choose in common formant:

• Width: 18 cm, 230 cm, 22 cm, 25 cm, 30 cm, 35 cm, 40 cm
• Length: in steps of 5 cm to 50 cm to 155 cm..
• Thickness: 5 cm.

Details:

Debased with slope and without upstand

Glued upstand : width 2 cm, height 1 or 2 cm

Debased with slope with upstand (cut in the mass): width 2 cm, height 1 or 2 cm

On edge glued stooling : 

5 cm setback glued stooling :

On edge cut in the mass stooling : 

5 cm setback cut in the mass stooling :

Water-sanded finishing :

Chiseled finishing on the front side and 5 cm on the lateral sides :

Drip channel (view from below)

Rounded "garage" chamfer with a radius of 2 cm

2 cm cuted "garage" chamfer

Attention:

1. For questions of logistics: parts of a length greater than 155 cm could be divided into equal shares of 155 cm maximum.
2. For questions of logistics: orders too small or too small may be declined. In general, the minimum order is 5 to 10 pieces.
3. All orders to logistics problem or too low can be removed directly by the customer. :-)
4. The measures indicated for order are the maximum measures of stone: thickness, length, width,... and therefore understand the heels, expectations, ears,...
5. We ensure control orders to validate the technical feasibility and/or good practices.