PACK Paillasson and Frame ON MESURE - Standard height

PACK Paillasson and Frame ON MESURE - Standard height

Deliverable in +- 7 days or less

Please indicate the exterior dimensions of the frame. We automatically calculate the dimensions of the doormat.

CUSTOMIZED PACK - Quality doormat + Frame for use in private homes, businesses and public buildings.

Standard overall height

Other standard dimensions: built-in doormats in stock to see on this page or frame in stock to see on this page .

Have you ever noticed the number of people who, day after day, set foot in your house? People who, unwittingly, bring sand, grease, dirt and water inside and who, thus, soil your interior and more.... A doormat will put an end to that.

Your visitors' shoes are thoroughly cleaned. This allows you to save on cleaning while your entrance always remains neat.

Advantages of built-in doormats:

• collection of dirt from shoes 7 days a week, 24 hours a day.
• Easy and quick installation
• Irregular shapes possible or logo marking (on request)
• Easy and shampooable cleaning
• Sustainable
• Colorful and adapted to your architecture
• Brands: ROSCO & VERIMPEX

Please indicate the exterior dimensions of the doormat. Please note, the production tolerance is +- 5mm.

Pierre & Sol can offer you help for other non-standard, irregular shapes, 1/1 scale stencils, etc. for a contribution to the costs.

Do not hesitate to click on the titles of the different doormats to see the details, cuts, colors, measurements, photos, etc.

STANDARD HEIGHT DOORMATS

RINOTAP KNM/KGM - Coconut fiber doormat - Natural Height 20 - 23 - 28 mm / Colorful (black and taupe gray) only Height 18 mm

Decorative and functional, the COCO fiber doormats from the RINOTAP range have been known for several years as the benchmark on the market. Traditionally used in the home, they can also handle the heavier traffic of offices.

• This product is resistant to water and various weather influences .
• Made from 100% hand-spun coconut fiber
• Implanted in a rubber backing more than 4mm thick.
• Natural Coconut in height 20 - 23 - 28 mm
• Coco Coloré only in 18 mm (black and taupe gray)
• Available in different colors: Natural coconut fiber, Gray and Anthracite Black.
• Max width 1200 mm.

DECORIB DCR - Polypropylene doormat - Grooved surface - Height 22 mm

Extraordinary combination of extremely strong polypropylene and needle felt techniques.

• The DECORIB DCR doormat is made of polypropylene fibers attached using a needle felt manufacturing technique.
• The polypropylene fibers are glued full bath on the basis of an acrylate dispersion on a natural latex backing.
• The thickness of the doormat is approximately 22mm.
• Available in different colors: gray, anthracite black and coconut.

ATTENTION: groove in the width direction (not the depth)

ECONOTAPIS VILT - Polypropylene doormat - Grooved surface - Height 20 mm

Doormat covered with polypropylene fiber .

• The ECONOTAPIS VILT doormat is made of polypropylene fibers.
• The polypropylene fibers are glued to a latex backing, and if necessary a PVC underlay.
• The thickness of the doormat is approximately 20mm.
• Available in different colors: gray, anthracite and beige.

ATTENTION: groove in the width direction (not the depth)

ECONOTAPIS DRY - Polyamide doormat - Height 19 mm

Doormat covered with polyamide fiber .

• The ECONOTAPIS DRY doormat is made of polyamide fibers.
• The polyamide fibers are glued to a PVC back , and if necessary a PVC underlay.
• The thickness of the doormat is approximately 20mm.
• Available in different colors: Black, Granito and Brown.

ECONOTAPIS SCRUB - Econyl doormat - Height 19 mm

Doormat covered with hard recycled Econyl polyamide fiber .

• The ECONOTAPIS SCRUB doormat is made of hard recycled Econyl polyamide fibers which catch dirt more easily.
• The polyamide fibers are glued to a PVC back , and if necessary a PVC underlay.
• The thickness of the doormat is approximately 20mm.
• Available in different colors: Black and Brown.

UNITAP UTP - Polypropylene doormat - Plain surface - Height 22 mm

Combination of extremely strong polypropylene and needle felt techniques.

• The UNITAP doormat is made of polypropylene fibers attached using a needle felt manufacturing technique.
• The polypropylene fibers are glued full bath on the basis of an acrylate dispersion on a natural latex backing.
• The thickness of the doormat is approximately 22 mm . Width max 2000 mm.
• Available in different colors: gray, beige, black.

POLYFRAME PF - Polyamide fiber doormat - Height 20 mm

POLYFRAME PF doormats are decorative and extremely durable entrance doormats, in other words an ideal floor covering for any high-traffic room.

• Thanks to the special composition of the yarn, these doormats have an enormous water and dirt absorption capacity , allowing considerable savings in maintenance and cleaning costs .
• The carefully chosen combination of colors hides the dirt collected from view; the entrance doormat continues to look sharp.
• The anti-dirt doormat for use in a setting.
• Suitable for both public and private use.
• The polyamide fibers are applied to a foam rubber backing .
• The total thickness of the entrance doormat is approximately 20 mm.
• Available in different colors: gray, taupe, brown and black.

GUMMIFLOR GL - 100% recycled rubber doormat - Environmental product - Height 22 mm

From recycling and sustainable = favorable for the environment.

The GUMMIFLOR doormat to be built into a frame in the floor is a decorative and extremely durable doormat ideal for any busy room. Thanks to the special construction, this doormat has an enormous water and dirt absorption capacity, saving considerably on cost.

The GUMMIFLOR doormat is easy to clean .

Composed of rubber bands, woven from nylon fibers with contemporary shades of color (see photos).

Nylon fibers appear on the top side of the rubber and add color to the surface.

The rubber strips are applied by vulcanization to a backing of reclaimed rubber.

The thousands of nylon fibers form a soft and absorbent surface on the surface.

The thickness of the entrance doormat is approximately 22mm.

STANDARD HEIGHT FRAMES

Quality framework for use in private homes, businesses and public buildings.

Benefits :

• Easy and quick installation
• Irregular shapes possible (on request)
• No risk of tripping
• A non-deformable set thanks to the 4 reinforcements provided in galvanized steel with sunk or recessed screws
• More visibility thanks to the visible edge
• Continuous anchor profile

PROMA-AN - Aluminum - Natural - Height 26 mm

Frames for entrance doormats in anodized aluminum color, natural color.

Profiles of 30 x 26 mm, 3 mm thick. Visible edge of 7 mm.

Profile height: 26 mm - Doormat installation height: 22 mm.

PROMA-AR - Aluminum - Stainless steel color - Height 26 mm

Frames for entrance doormats in INOX-colored aluminum.

30/26/3 mm profiles, the visible upper edge of which is 7 mm and fixings.

Profile height: 26 mm - Doormat installation height: 22 mm.

VER-ALU - Aluminum - Natural - Height 26 mm or 31 mm

Frames for entrance doormats in aluminum color, natural color.

Profiles of 31 x 26 mm, 3 mm thick. Visible edge of 6 mm.

Profile height: 26 or 31 mm - Doormat recess height: 20 or 25 mm.

PROMA-AZ - Aluminum - Anthracite Gray Color - Height 26 mm

Frames for entrance doormats in ANTHRACITE GRAY aluminum.

30/26/3 mm profiles, the visible upper edge of which is 7 mm and fixings.

Profile height: 26 mm - Doormat installation height: 22 mm.

VER-BLACK - Black lacquered aluminum - Height 26 or 31 mm

Frames for entrance doormats in black lacquered aluminum.

Profiles of 31/26 or 26/31 mm, the visible upper edge of which is 6 mm.

Profile height: 26 mm or 31 mm - Doormat recess height: 20 mm or 25 mm.

Please note, the thickness of the frame is 6 mm, possibly provide an underlay to compensate for the thickness.

PROMA-MS - Brass - Natural - Height 26 mm

Frames for entrance doormats in natural brass .

30/26/3 mm profiles, the visible upper edge of which is 7mm.

Profile height: 26 mm - Doormat installation height: 22 mm.

VER-LAI - Brass - Height 26 or 31 mm

Frames for entrance doormats in brass-colored aluminum.

Profiles of 31/26 or 26/31 mm, the visible upper edge of which is 6 mm.

Profile height: 26 mm or 31 mm - Doormat recess height: 20 mm or 25 mm.

Please note, the thickness of the frame is 6 mm, possibly provide an underlay to compensate for the thickness.

DOORMAT UNDERLAYERS

RUBBER, Rubber underlay - CUSTOMIZED

Custom recycled rubber underlays for entrance doormats.

• Underlays allowing you to obtain a desired height of an entrance doormat.
• Closed structure.
• Cuts very easily
• Compatible with a humid environment