Recessed access cover - Height 75 mm - Customized - Rosco

Cover to tile to measure: height 75 mm 

Aluminium with or without reinforcements or Inox

The cover is light, easy to place and easy to open.

Standard dimensions in stock to see on This page

Currently out of catalog
€0.00Tax Included
ROS 75mm SM
9145385968277

Customized recessed access cover - Height 75 mm

Manufacturing time: + - 2 weeks for aluminum, + - 10 weeks for stainless steel.

Aluminium with or without reinforcements or Inox.

The cover is light, easy to place and easy to open.

Function:

The cover tile can be installed both inside and outside. For example in houses, garages, gardens,...

It is filled with mortar or concrete and is adapted to the adjacent floor covering.

The 2 keys allow to remove the cover of the chassis are supplied with the set.

The cover is light, easy to place and easy to open.

In each package, you can find a how-to in 2 languages as well as the correct keys.

3 QUALITIES OF YOUR CHOICE.

Feel free to click on the title for more details and the covers in stock.

Inner frame provided depending on size.

BAS: Aluminium, waterproof to the water and smells

The bottom cover consists of a chassis and a cover in aluminium profile.

Height of wall: 75 mm.

Internal height: 65 mm.

Profile width: 50 mm

Neoprene to cone-shaped sealing band. reinforced sealing.

Certificate of classification of resistance according to NBN EN 12§8 on request.

BASV: Aluminum reinforced, waterproof to the water and smells

BASV cover consists of a frame and a cover in aluminium profile.

Height of wall: 75 mm.

Internal height: 65 mm.

Profile width: 50 mm

Neoprene to cone-shaped sealing band. reinforced sealing.

Certificate of classification of resistance according to NBN EN 12§8 on request.

BRS: Stainless steel, waterproof to the water and smells

BRS cover consists of a chassis and a lid in stainless steel.

Height of wall: 75 mm.

Internal height: 65 mm.

Profile width: 50 mm

Neoprene to cone-shaped sealing band. reinforced sealing.

Instruction placement and usage for chassis and cover tile: 

PLACEMENT :

(1) the chassis to tile must be placed in the closed position c-d the cover must be fitted into the framework.

IN NO CASE THE FRAMEWORK CAN BE EMBEDDED WITHOUT THE NESTING OF THE COVER.

(2) the chassis to tile must be placed at the exact level on a bed of mortar, which implies that the surface of the tile must be at the same level as the top surface of the chassis to tile. The framework should not exceed the future level of the ground.

(3) during the operation to cover filling with concrete or screed, it must take into account the thickness of the floor finishing material (tile, tile, terazzo, pvc, carpet, parquet, etc.).
Note: The strength of the frame depends on the quality of the filling material!

(4) in the case of installation of the cover in asphalt or magnesium-based product, it must take into account the expansion of these materials.

(5) after having grouted (during the cleaning of the surface of tile), the cover must be dislocated from the framework to remove any remains of seal, and to control if the seal is always well positioned.

(6) Insert the cover again in the frame and screw the whole.

OPEN AND CLOSE:

(1) as appropriate, remove caps made of plastic with a screwdriver.

(2) unscrew the bolts using the supplied key. (available for purchase as an accessory)

(3) screw the handles provided as deep as possible and lift the cover.


Note: It is recommended to open each chassis to tile once a year and to grease the inside of the frame with bolts.

ROSCO specificity:

Each standard format cover is welded by robot which guarantees a clear and safe finish.

Each cover is individually packed to avoid damage during transport.

Rosco
ROS 75mm SM

Specific References

EAN13
9145385968277
There are no reviews for this product yet.